Aller au contenu principal

Keyboard

Ce dont vous avez besoin

  1. Keyboard, Keyboard: étape 1, image 1 de 1
    • Before proceeding, power down your Laptop and remove the power cable.

    • Put your computer in front of you and open up the display.

  2. Keyboard: étape 2, image 1 de 1
    • When you've opened up the display. Remove this panel with a spudger as shown in this picture. Do it like that on the other side too until the panel clicks open.

  3. Keyboard: étape 3, image 1 de 1
    • When you've done everything correct, you should see a view like this.

  4. Keyboard: étape 4, image 1 de 1
    • After the previous step, try to put the spudger in between the keyboard and the plastic frame. Then the pins holding it in should click.

  5. Keyboard: étape 5, image 1 de 1
    • When pushing the keyboard try to be careful cause underneath, the keyboard is connected to the motherboard with a ribbon cable.

    • After the previous step there are 4 more plastic pins, for these you can just slide the keyboard out of these.

  6. Keyboard: étape 6, image 1 de 1
    • Be careful when unplugging the ribbon cable from the motherboard.

    • If you need to replace they keyboard and nothing else now is the time to do so.

    • With a spudger remove the ribbon cable from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Regome

Membre depuis le 01/20/23

767 Réputation

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 64