Sharp-EL-531xg Battery Replacement

Introduction

This guide will show you how to replace the battery in a Sharp-EL-531xg calculator. You may need to change the battery when the calculator's display is dim or when the calculator is not working. This calculator has two ways to charge the battery: the solar cell and the battery; however, the solar cell is dependent on the battery.

Ce dont vous avez besoin

Étape 1 Battery

Sharp-EL-531xg Battery Replacement, Battery: étape 1, image 1 de 1

Press the 2nd F button and then the OFF button to power down the calculator.

Modifier

Étape 2

Flip the calculator over so the back is facing upwards.
Remove the single screw from the battery panel using a Phillips #0 screwdriver.

Modifier

Étape 3

Remove the battery cover using two fingers.

Modifier

Étape 4

Sharp-EL-531xg Battery Replacement: étape 4, image 3 de 3

Place a spudger in the slot next to the battery and pry upwards to remove the battery.
Avoid using a sharp tool to remove the battery.

Modifier

Étape 5

Place the new battery into the slot with the positive (+) side facing upwards
Don't press the battery too hard.

Modifier

Étape 6

Put the battery cover back on.
Tighten the battery cover screw with a Phillips #0 screwdriver.

Modifier

Étape 7

Press the On button to turn on the calculator.
Flip the calculator over so the bottom is facing upwards.
Press the reset button with the pointed end of a spudger to restart the calculator.