DualShock 4 (JDM-030 and Earlier) Controller Battery

  • DualShock 4 (JDM-030 and Earlier) Controller Battery
  • DualShock 4 (JDM-030 and Earlier) Controller Battery
DualShock 4 (JDM-030 and Earlier) Controller Battery

This is a used, OEM battery. Capacity is at least 70% of the original 1000 mAh.

Condition : D'occasion

$9.99

$9.99

Nous vous enverrons un message lorsque le produit sera à nouveau disponible.

Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

Détails du produit

Description

Description

Replace a dead or dying LIP1522 battery in your DualShock 4 controller.

The connector on this battery fits PlayStation 4 DualShock 4 controller models JDM-001, JDM-011, JDM-020, or JDM-030.

The connector on this battery does not fit model JDM-040 DualShock 4 controllers.

Note: Lithium ion battery shipping regulations limit the shipping methods for orders containing batteries. Domestic orders may only be shipped via Standard shipping. iFixit is not able to ship batteries internationally or outside the contiguous US at this time. iFixit Customer Support will contact you if your order needs to be modified after it is placed.

Attention

Lithium-ion batteries pose a fire hazard if they swell due to age or defect. Learn more about safe handling and proper disposal of all batteries.

Compatibilité

DualShock 4
JDM-001
JDM-011
JDM-020
DualShock 4 CHU-ZCT2U
JDM-030

Histoires de réparations

Sean Lichtenstein's Story Photo #1330869

Mon problème

Cracked/Smashed IPhone 6S screen

Ma solution

It went well! A little more difficult than I expeted but the guides were a fundamental help with this repair- I would not have been able to complete it without them!

It was a bit tricky getting the Home button in place as well as the earpiece speaker and camera- but . . .

Mon problème

power brick went out in the XBox

Ma solution

The repair was fairly easy. Although the only issues i had was not putting bottom metal cover on before i closed it up. So had to take apart. Then put back together. Then realized i let a few screws out. haha so took apart again installed screws and put back together, . . .

Mon problème

OEM battery was no longer holding charge

Ma solution

Awesome! ifixit tool kit was a huge help

Mon conseil

Don’t attempt this without a iPod opening tool.

Mon problème

Battery was old and drained quickly.

Ma solution

It didn’t take 45 min. 25 is more accurate.

Mon conseil

Instead of trying to pull the glue, heat it up for a minute and the battery comes right off.

Mon problème

I had a guy from Facebook come and ask me to repair his iPhone 6 Plus screen because he saw a recent post that showed I can do that

Ma solution

It went flawlessly

Mon conseil

I know by heart the way around an iPhone but if you don’t, and not many people do, I suggest to use their instructional videos

Mon problème

It had the 3 beep of death. I purchased 2, 8s of ram for a total of 16, however. It would not allow this. So ended up with 10gb. Initially I thought I had a bad top ram slot. But the 2gb took. But had to put them in one at a time to test them. I truly would not wanted to replace the logic board. S . . .

Mon problème

I replaced the battery, fan, and right speaker/subwoofer

Ma solution

Took my time and reviewed videos over and over. Everything went smoothly.

Mon conseil

for images, I would show the before and after shot of how to remove certain connections. I didn't know how to remove a certain piece from your website, but found out fro . . .

Mon problème

My MacBook Pro Early Rubber Feet has left and I was replace it with MBP Rubber Feet that i was buy on iFixit Store. I buy Essential Electronics Toolkits to do this.

Ma solution

First, i replace botoom case my MacBook Pro and then replace 4 rubber feet.

Just do it.

Mon conseil

You don't need adhesive 'cause iFixit MBP Rubber . . .

Mon problème

Still using the original battery in 2018 so decided it was time.

Ma solution

Replacement went smoothly -- except for the enclosed tools. I recommend purchasing the toolkit to avoid stripping the screws.

Mon conseil

The four screwdrivers are really just toys; please either spring for a better set of just do away with them.

Mon problème

Hard drive died. My first delve into computer guts. Drive seemed fine, head not stuck, but made clicking noise. Decided I wouldn't be able to recover. Maybe circuit board... Bought Evo 256Gig SSD and while looking around the delightful ifixit site, discovered the discussions about upgrading the . . .

Voir plus