Xbox 360 Jasper Parts
Replacement parts for your Xbox 360 Jasper model to fix your broken device!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Choisissez une catégorie
Pièces compatibles avec Xbox 360 Jasper :
Arctic Silver Thermal Paste
Forms a continuous, heat conductive layer between a processor and its heat sink. A new layer of thermal paste keeps your processor from overheating. 3.5 grams
Arctic Silver ArctiClean
Two part cleaner dissolves old thermal paste on heat sinks and processors. One 30 ml bottle of thermal material remover and one 30 ml bottle of thermal surface purifier.
Xbox 360 Red Ring of Death Fix Kit
Fix kit for Xbox 360 consoles with the "Red Ring of Death" (RRoD) failure. Replace, reattach, and reclamp the heat sinks on your Xbox 360. Usually fixes a RRoD Xbox—als...
Xbox 360 RF Module
This small circuit board houses the electronic power button and LED status lights.
Xbox 360 Motherboard Screw Set
This set of screws secures the motherboard to the chassis.
Xbox 360 Bottom Vent
This gray plastic perforated vent covers the bottom face of the Xbox 360.
Xbox 360 Upper Case Screw Set
This set of screws secures the upper case to the chassis.
Xbox 360 Eject Button
Replace the plastic eject button.
Xbox 360 Dual Fans (Late Models)
Replace the dual cooling fans with power cable and three-pin connector for late model (all except Xenon) Xbox 360 consoles. Fix overheating issues.
Xbox 360 Faceplate
Replace the plastic face plate including the USB & memory card doors.
Infos sur l'appareil
The Xbox 360 Jasper revision was released in late 2008. This revision features CPU and GPU chips both manufactured with a 65 nanometer process. Thanks to the power reduction from the improved electronics, this revision of the Xbox 360 only requires a 150 watt power supply.