MacBook Pro 17" (Model A1229) Left Fan

  • MacBook Pro 17" (Model A1229) Left Fan
MacBook Pro 17" (Model A1229) Left Fan

39,99 $US

39,99 $US

Nous vous enverrons un message lorsque le produit sera à nouveau disponible.

Détails du produit

Description

Description

Replace a malfunctioning or noisy fan compatible with a Model A1229 17" MacBook Pro.

If your screen is facing you, this is the fan on the left side of the machine.

Compatibilité

Compatibilité

  • MacBook Pro 17" A1229 Mid or Late 2007

Spécifications

Spécifications

Part #:
922-8106

Compatibilité

MacBook Pro 17" Models A1151 A1212 A1229 and A1261
2.4 GHz (Santa Rosa)
2.6 GHz (Santa Rosa)

Histoires de réparations

Avatar de l'utilisateur

Mon problème

The left fan was dying.

Ma solution

Well, it wasn't easy but no so difficult i thought. It would have been much more easier with the proper tools to remove the connectors on the board.

Mon conseil

Don't forget to get the right tools. It's much more safer.

Avatar de l'utilisateur

Mon problème

Right fan got very noisy

Ma solution

It went perfect, easy with Ifixit guidance, changed left fan in same operation + cleaned both cooling grills, both fans been running since 2007, a lot of hours and Rpms since 2007

Mon conseil

Just do it, tool kit recommended was perfect, maybe a little more advice about disconnecting elec . . .

Avatar de l'utilisateur

Mon problème

The left fan on our MacBook Pro 17" A1229 was making a lot of noise.

Ma solution

Following your guide made the process extremely easy and fun to complete for someone who has never worked on a computer before. It took me about an hour from start to finish. The most difficult step for me was #16 because you cann . . .

Avatar de l'utilisateur

Mon problème

Fan very noisey

Ma solution

Followed your instruction sheet. Everything went perfectly.

Mon conseil

Just follow the instructions

Avatar de l'utilisateur

Mon problème

The left fan on my MacBook Pro has been making noise for months and finally started sounding like an ice crusher.

Ma solution

The repair took about 90 minutes from start to finish. There are a lot of tiny screws.

Mon conseil

Set up a well-lit area and be sure to segregate each of the groups of screws as you remove them.

Voir plus