MacBook Pro 17" Unibody (Early-Mid 2009) MagSafe DC-In Board

  • MacBook Pro 17" Unibody (Early-Mid 2009) MagSafe DC-In Board
  • 360°
360
MacBook Pro 17" Unibody (Early-Mid 2009) MagSafe DC-In Board

This used part may be missing the light gray plastic face. The plastic can be transferred from your existing part.

Condition : D'occasion

$44.99

$44.99

Nous vous enverrons un message lorsque le produit sera à nouveau disponible.

Répandez la magie de Noël
Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
Répandez la magie de Noël
Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12

Détails du produit

Description

Description

Is your laptop not charging correctly?

This part connects the wall adapter power to the logic board. A safe magnetic connection prevents damage to the laptop caused by tripping over the power cord. Identified by 820-2361-A printed on board.

Compatibilité

MacBook Pro 17" Unibody
2.66 GHz (Early 2009)
2.8 GHz (Mid 2009)
2.93 GHz (Early 2009)
3.06 GHz (Mid 2009)

Histoires de réparations

Mon problème

DC-in port was defective. The charging connector would get hot and make a soft high pitched electronic "squeal." Eventually the two outer prongs on my chargers would melt down to little nubs to the point where the computer wouldn't even charge anymore. I let the damage get so bad that my DC-in port . . .

Mon problème

My MagSafe dc in board was charred from using an old charger (possibly wrong voltage) and continued to work, but only if the charger sat at a specific angle.

Ma solution

WARNING My 2011 MBP 17" uses a Torx T6 as well as a Phillips#00, that was not mentioned in the ifixit guide, but luckily I was able to g . . .