ASUS Eee Pad Transformer Prime LCD Flex Cable

  • ASUS Eee Pad Transformer Prime LCD Flex Cable
  • ASUS Eee Pad Transformer Prime LCD Flex Cable
ASUS Eee Pad Transformer Prime LCD Flex Cable

Condition : D'occasion

$4.99

$4.99

Nous vous enverrons un message lorsque le produit sera à nouveau disponible.

Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

Détails du produit

Description

Description

Having trouble getting a picture on to the screen and you know it's not the LCD screen?

  • This LCD flex cable connects the LCD to the motherboard.
  • This is a used OEM part.

Histoires de réparations

ericzel08's Story Photo #1329847
ericzel08's Story Photo #1329848

Mon problème

Phone was dropped. Screen cracked so bad there was no display.

Ma solution

As good as most screen repairs can be expected to go.

Mon conseil

Buy some adhesive tape. If I had some I would've completely removed the leftover junk and put new stuff on the screen.

Mon problème

I waited like 8 months for parts to come into stock. Poor inventory procurement!

Ma solution

Series 2 - 42mm screen and digizer installed as expected.

Mon conseil

Take your time. Use a small 1mm flat head screw driver to remove the extra 3M double sided tape from the aluminum sealing surface. Use acitone to remove the extra . . .

Mon problème

The housing on my Switch had become warped, in ordered a replacement housing and decided to throw some custom colors on my Joy-Cons while I was at it.

Ma solution

Fairly easy, the hardest part was making sure not to tear the digitizer flex and making sure all the meshes small parts were transferred from the old . . .

Mon problème

Went well. He did all the work and I just held the laptop and scroll down the instructions. He is 14 y.o. and has done multiple screen replacements and battery replacements.

Ma solution

See above.

Mon conseil

Perfect Father & Son bonding experience.

Mon problème

Lithium battery needed to be replaced

Ma solution

Your instructions were spot on and the repair was perfect.

Mon conseil

Patience and heat to loosen the adhesive.

Mon problème

My wife dropped it several times creating multiple cracks on the screen.

Ma solution

The repair went well. I took my time and followed all the steps in the repair guide faithfully. I was even able to unsolder the small wake/sleep sensor from the broken screen and microsolder it back onto the new replacement scre . . .

Mon problème

My pixel XL's USB-C port would smoke when the cable was connected and the plastic portion of the connection was visibly melted.

Ma solution

I was successful in changing the battery charging circuit/daughter board but I accidentally sliced the digitizer traces on the ribbon cable for the OLED panel while removing . . .

Mon problème

My phone is long since out of warranty or support. The battery had gotten to a point where I needed to charge as I used for traffic app, etc. I watched the videos and decided it was well within my capabilities to change battery. Worst case scenario would be that I irretrievably broke something and . . .

Mon problème

After well over 2 years in service, my factory battery was completely incapable of powering the phone for more than a few minutes with the screen off. Turning the screen on meant a nearly instant shutdown.

Ma solution

The repair went incredibly well. Despite this being a particularly difficult phone to open, i . . .

Mon problème

The battery was losing charge rapidly, and seemed to be showing its age. The Pixels that have come out since did not appear to be compelling upgrades. So, I figured replacing the battery made the most sense.

Ma solution

The outcome was positive. Opening the phone requires getting past a lot of epoxy. I marred on . . .

Voir plus