Galaxy S6 Home Button and Cable Assembly

  • Galaxy S6 Home Button and Cable Assembly / White / New
  • Galaxy S6 Home Button and Cable Assembly / White / New
Galaxy S6 Home Button and Cable Assembly

$19.99

$19.99

Nous vous enverrons un message lorsque le produit sera à nouveau disponible.

Répandez la magie de Noël
Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
Répandez la magie de Noël
Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12

Détails du produit

Description

Description

Replace the cable, internal switch, home button face and the fingerprint sensor as well. The fingerprint sensor will still work too!

Compatibilité

Samsung Galaxy S6
AT&T (G920A)
Global (G920F)
Sprint (G920P)
T-Mobile (G920T)
Verizon (G920V)

Histoires de réparations

Scott Cassio's Story Photo #885867

Mon problème

Cracked front panel assembly

Ma solution

The repair is pretty straight forward until the conclusion which states, 'But first ensure to place a narrow piece of tape over the copper/silver at the bottom of the digitizer to the left and right of the home button.'

Since there was no tape in those areas when I took . . .

Mon problème

Old battery couldn't hold a charge for long.

Ma solution

Your tools made getting into the case easy. The only problem was getting the old battery out... Too much original glue!

The supplied tools made the job much easier.

Mon conseil

Don't try to open the case with your fingernails!

Mon problème

Spider web screen

Ma solution

Repair went very well instructions were plain enough was a little nervous of crushing a connector after the first one was in it was smooth sailing about an hour to do

Mon conseil

Go slow take your time and follow instrutions

Mon problème

Accidentally dropped my phone right on the back.

Ma solution

With a heat gun on low the glue softened up very easily. Needed something sharper and thinner to get under the glass but once I did it peeled off easily. Removed all the old glue with a knife to hopefully retail some water resistance.

Mon conseil

Use the heatgun . . .

Mon problème

Screen was badly cracked after bing dropped on corner of iPad.

Ma solution

Repair went smoothly. No major issues but needed another tool to make it really work.

Mon conseil

Need to stay patient as it's tedious work getting the screen off. After that it's pretty easy. The plastic tool to pry open the screen from the edge isn' . . .

Mon problème

My wife's phone. She cracked her LCD screen

Ma solution

The "Ifixit" video manual was to the point and quite accurate except a couple of things. On this particular phone the original adhesive refused to let go after heating the chassis several times. The iSclack was not strong enough to lift the rear cover loos . . .

Mon problème

My power switch was stuck. I bought a spare part off eBay.

Ma solution

You guys rated the fixability a "1" and I completely agree. What a pain. I was able to get the switch replaced and the unit works except that when I was using the picks I pushed one in too far and it broke the digitizer membrane on the top-le . . .

Mon problème

Cracked Screen

Ma solution

Great!

Mon conseil

Becareful where you order your screens. I had to do this twice!!

Mon problème

Kindle would not charge unless you did the wire dance ( moved it all over) until you find the spot that if you're lucky will charge after you sit it down . Got to the point that I had to do it without moving the Kindle.

Ma solution

Very well, you just have to pay attention to details.

Mon conseil

Have a clean surface and all . . .

Mon problème

iPad 4th Gen WiFi with a broken front glass.

Ma solution

The instructions were great except that for some reason, they assumed that I would be replacing an intact glass panel. Mine was broken in 4 lines, and every time I got to another break, it would shatter down to powdered glass and glue (Yes I know it is 3M . . .

Voir plus