Annuler
Ce produit n'est pas disponible dans votre pays.
Numéro d'article: IF145-081-4
Ce produit n'est pas disponible dans votre pays.
8,99 $US
Discount iFixit Pro appliqué. Reg :
8,99 $US
Les pièces d'occasion A-Stock sont en excellent état
Les pièces B-Stock ont de légers défauts cosmétiques
Les pièces C-Stock ont des défauts cosmétiques majeurs mais sont entièrement fonctionnelles
8,99 $US
Discount iFixit Pro appliqué. Reg :
8,99 $US
En rupture de stock
Prêt pour l'envoi
Prêt pour l'envoi
En rupture de stock
Nous vous enverrons un message lorsque le produit sera à nouveau disponible.
En rupture de stock
Prêt pour l'envoi
Nous n'avons pas suffisamment d'articles en stock
Détails du produit
Description
Description
Use this precision Tri-point Y0 DIY or professional electronics repair. Slightly different from a "tri-wing", this driver fits some of the smaller "tri" screws found on Apple track pads and other products.
The iFixit Tri-point Y0 screwdriver features a knurled grip and rubberized, ergonomic handle with swivel top. Made in Germany with uncompromising quality in manufacturing, this precision Tri-point Y0 screwdriver is the last driver you'll ever need to buy. And to back that up, it's covered by iFixit's Lifetime Warranty.
Description
Description
Use this precision Tri-point Y0 DIY or professional electronics repair. Slightly different from a "tri-wing", this driver fits some of the smaller "tri" screws found on Apple track pads and other products.
Top of the line professional made in USA driver with swivel top ESD safe ergonomic handle.
Histoires de réparations
The battery was almost 9 years old and only had 57% charge capacity left.
The repair was very simple. I believe it took longer to restart the laptop then to do the replacement.
Make sure to read, understand and follow the directions in the guide.
2 problems: First, battery losing life, then computer could not communicate with hard drive.
Went well. The drive cable was a bit of a challenge because of the need to bend it at sharp right angles to fit stair-step in upper case where it gets fastened with screws, but after several tries, got it to fit. Battery replacement was easy once I go the 3-point screwdriver to remove and install the battery hold-down screws. The computer works fine after the repairs
Be prepared to make the right-angle bends needed in the drive cable
2 problems: First, battery losing life, then computer could not communicate with hard drive.
Went well. The drive cable was a bit of a challenge because of the need to bend it at sharp right angles to fit stair-step in upper case where it gets fastened with screws, but after several tries, got it to . . .
Battery was completely dead
Super easy and very helpful guide to understand and follow
You guys do great work thanks!
Original battery was swollen
Nice and simple
Be sure to read the guide. There was one connector I originally overlooked that the guide pointed out.
Have the right tools. The screws that hold the battery in place would be badly damaged and likely the screwdriver I used would be too.
Electrical part which had a relative simple problem to fix.
Very well - as expected.
When unsuccessful finding the appropriate tool at the local hardware store, go to the internet - especially the iFixit website.
No problem, only self install 0,35$/GB common ssd Instead of 3 times the price of Apple's ssd...
Good. ifixit video tutorial + adhesive parts make it easy
Carefully remove the bottom Edge adhesive. Don't use a cutter to cut it , Risk of scratching the back of the bottom glass panel edge , (visible on the front) like me
No problem, only self install 0,35$/GB common ssd Instead of 3 times the price of Apple's ssd...
Good. ifixit video tutorial + adhesive parts make it easy
Carefully remove the bottom Edge adhesive. Don't use a cutter to cut it , Risk of scratching the back of the bottom glass panel edge , (visible on . . .
Only my grandson knows
Hasn't started yet-- gets parts Dec. 25
Ask for recipients email
Screen was broken and I decided to fix it instead of replacing the whole unit.
We followed the instructions step by step and it went very well. The phillips screwdriver ended up not really working on the first set of screws but i had another that was better but other than that everything went really smooth.
Follow the instructions carefully and just take your time and be careful and it should go as shown.
Screen was broken and I decided to fix it instead of replacing the whole unit.
We followed the instructions step by step and it went very well. The phillips screwdriver ended up not really working on the first set of screws but i had another that was better but other than that everything went really . . .
have used ifixit site before and was very pleased with outcome
the repair went smoothly; my trackpad repair came without the cable so i needed to swap that over so there should be a couple of pics on how to do that
don't be afraid to tackle such a project; plenty of guides and tools available to do the job
have used ifixit site before and was very pleased with outcome
the repair went smoothly; my trackpad repair came without the cable so i needed to swap that over so there should be a couple of pics on how to do that
don't be afraid to tackle such a project; plenty of guides and tools available to do th . . .
My trackpad had become extremely hard to click and took a lot of force to do any clicking. So, I decided to replace the pad and upgrade the RAM while I was inside the computer.
The repair was simple and easy and took about 25 minutes to complete. I even did a lot of cleaning inside the computer while I had it open to remove dust and grime.
The big ah-ha moment for me came when I installed the new trackpad and felt that great clicking sound again. It worked great until I reassembled the entire computer and found that the new trackpad wouldn't click either. After a few minutes of troubleshooting, I found that my battery had swollen and was pressing against the trackpad preventing it from clicking. I ordered a new battery and all is well. Bottom line, check your battery for swelling before you replace your trackpad.
My trackpad had become extremely hard to click and took a lot of force to do any clicking. So, I decided to replace the pad and upgrade the RAM while I was inside the computer.
The repair was simple and easy and took about 25 minutes to complete. I even did a lot of cleaning inside the computer while . . .
Voir plus
Voir moins
Les clients ont également acheté
