iPad 2nd and 3rd Gen Home Button Assembly

  • iPad 2nd and 3rd Gen Home Button Assembly / Black
  • iPad 2nd and 3rd Gen Home Button Assembly / Black
  • iPad 2nd and 3rd Gen Home Button Assembly / White
  • iPad 2nd and 3rd Gen Home Button Assembly / White
iPad 2nd and 3rd Gen Home Button Assembly

12,99 $US

12,99 $US

Nous vous enverrons un message lorsque le produit sera à nouveau disponible.

%Livraison gratuite pour toute commande supérieure à 100,00 $US ou contenant un Pro Tech Toolkit !

Parcourez notre boutique

Détails du produit

Description

Description

Replace a broken or damaged home button assembly in an iPad 2 or 3 and fix home button functionality issues with this part. This part includes the plastic home button, mounting bracket, control board switch, the button spring, and adhesive.

Compatibilité

iPad 2 CDMA
16 GB
32 GB
64 GB
iPad 2 GSM
16 GB
32 GB
64 GB
iPad 2 Wi-Fi EMC 2415
16 GB
32 GB
64 GB
iPad 2 Wi-Fi EMC 2560
16 GB
iPad 3 4G
16 GB LTE/CDMA
16 GB LTE/GSM
32 GB LTE/CDMA
32 GB LTE/GSM
64 GB LTE/CDMA
64 GB LTE/GSM
iPad 3 Wi-Fi
16 GB
32 GB
64 GB

Voir 3 appareils supplémentaires

Histoires de réparations

Avatar de l'utilisateur

Mon problème

crack my top screen a week ago.

Ma solution

repair went easy as pie. about 1 hr. This is the third screen for this ipad. I also have 3 laptops, two of which I have rebuilt / upgraded. I have an IPhone 5 that had cracked glass, bad battery given to me, I totally rebuilt it, and still use it to this day.

Mon conseil

Ta . . .

Avatar de l'utilisateur

Mon problème

The home button on an ipad 2nd gen I was working on did not function.

Ma solution

Since I was replacing the digitizer also the home button was a breeze.

Mon conseil

Be very cautious of the Wi-Fi antenna at the bottom and the power ribbon in the top right.

Avatar de l'utilisateur

Mon problème

Pushing the home button had no results unless it was pushed very hard

Ma solution

The new parts ordered were installed without concern. After cleaning off the glue strips, I temporarily installed the digitizer screen and the home button still did not function as expected. Made some measurements and found that t . . .

Avatar de l'utilisateur

Mon problème

Front glass broken

Ma solution

Was ok! The problem has been fixed in around 2 hours

Mon conseil

Be patient and concentrate!

Avatar de l'utilisateur

Mon problème

A friend offered me his iPad that had a badly broken screen for free. He knows that I'm pretty handy with woodworking, so he thought I might give a try with electronics. He had covered it with packing tape, and it was still functional, but it would make some errors recognizing touches, swipes, tap . . .

Voir plus