iPad 3/4 Battery

  • iPad 3/4 Battery / New / Black Fix Kit
  • iPad 3/4 Battery / New / White Fix Kit
  • iPad 3/4 Battery / New / Part Only
  • iPad 3/4 Battery / New / Part Only
  • 360°
360
iPad 3/4 Battery

44,99 $US

44,99 $US

Nous vous enverrons un message lorsque le produit sera à nouveau disponible.

%Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

Parcourez notre boutique

Détails du produit

Description

Description

Replace a dead or malfunctioning model A1389 battery compatible with a 3rd and 4th Gen iPad.

This battery is brand new! Each one has been tested to confirm that there are no cycles on the cell and that the capacity is 95% or higher.

Contenu du kit

Contenu du kit

The Fix Kit includes iFixit’s iOpener, a tablet opening tool designed to apply heat directly and evenly to case components joined with adhesive. Once the adhesive is softened with heat applied by the iOpener, the adhesive can be sliced using the many tools included in the iOpener kit. This toolkit is designed specifically for the iPad, but works with all tablets, smartphones, or other electronics needing heat application in the disassembly process. The iOpener is heated in the microwave and is reusable.

iOpener Kit includes:

Compatibilité

Compatibilité

  • iPad 3rd Gen A1416, A1430, and A1403
  • iPad 4th Gen A1458, A1459, and A1460

Spécifications

Spécifications

Part #:
616-0593, 616-0592
Model #:
A1389
Watt Hours:
42.5 Wh
Voltage:
3.7 V

Vidéo d'installation

Compatibilité

iPad 3 4G
16 GB LTE/CDMA
16 GB LTE/GSM
32 GB LTE/CDMA
32 GB LTE/GSM
64 GB LTE/CDMA
64 GB LTE/GSM
iPad 3 Wi-Fi
16 GB
32 GB
64 GB
iPad 4 CDMA
16 GB
32 GB
64 GB
iPad 4 GSM
16 GB
32 GB
64 GB
iPad 4 Wi-Fi
16 GB
32 GB
64 GB

Voir 2 appareils supplémentaires

Histoires de réparations

Avatar de l'utilisateur
Garrett Brown's Story Photo #1115016

Mon problème

The client had a cracked front digitizer screen and a faulty battery.

Ma solution

Repair went great. Battery works awesome and the client is happy for which is the most important task for any repair tech.

Mon conseil

Always purchase your products/job materials domestically, if possible. Especially from iFixIt. THEY ARE THE B . . .

Avatar de l'utilisateur

Mon problème

Original battery was bad and wouldn't take a charge. Replaced battery which went well but the iPad was still bricked and unrecoverable afterwards. This was not the fault of the new battery or repair kit.

Ma solution

Repair was easy to follow and I didn't even need all the steps to accomplish what I was going for . . .

Avatar de l'utilisateur

Mon problème

My battery went bad and needed to be replaced.

Ma solution

The repair went fine—took longer than 1 hour since this was my first time doing it.

Mon conseil

I did not use iFixit heating pad. I used a hot air fan instead.

Avatar de l'utilisateur

Mon problème

My iPad just suddenly went out and I couldn't get it to turn on or even charge. I took it to the Apple Store and they told me the battery was dead and needed to be replaced.

Ma solution

I had a friend do the repair for me. Once he exchanged the batteries, the iPad was able to charge up, but the touch screen wasn . . .

Avatar de l'utilisateur

Mon problème

The batteries started to die after 2-3 hours gaming, which is less then 50% compared to new batteries

Ma solution

I would say, the battery replacement part is fairly easy. Removing the batteries takes time and you need to pull all three battery cells at the same time. I rushed the first cell the first time I did . . .

Avatar de l'utilisateur

Mon problème

The battery was not holding a charge.

Ma solution

Initially, I was unable to get the screen started out of the bezel. the Iopener did not seem to get hot enough. After a couple of cycles in the microwave the Iopener burst open. Rather than give up, I tried a small electronics heat gun on the right top corner. T . . .

Avatar de l'utilisateur

Mon problème

Battery had stopped charging on a family members iPad 4

Ma solution

I did the repair while at work(I'm a computer tech) since I had my tools there. Unfortunately I did not have a heat gun or hair dryer, so I opted to go on without it. Getting the screen off was probably the hardest part, especially without apply . . .

Avatar de l'utilisateur

Mon problème

battery was first suspect .,.

Ma solution

it took more than 1 hour to change battery, but all works perfectly now.

Mon conseil

I ordered a replacement front panel, because I 'heard' that the chance that it would broken during the change was big. it is not the case, but the iWarmer and the tools were really useful. the guides . . .

Avatar de l'utilisateur

Mon problème

iPad was discharging quickly. Then it would not charge at all. Would not turn on or charge (dead). Determined the battery needed replaced.

Ma solution

Used the iFixit guide and was able to successfully repair. I used a hair dryer to soften the adhesive and was very patient (heat, cautiously pry, heat and pry, . . .

Avatar de l'utilisateur

Mon problème

A customer brought in a broken, brittle iPad 2. They had dropped it several times, 2 years ago, but with no repair shops in the area they had no way to get it fixed. Until now.

Ma solution

Getting the glass off the iPad was difficult, more difficult than it has ever been. I can only attribute that the the lo . . .

Voir plus