iPad 3 Front Glass/Digitizer Touch Panel Full Assembly

  • iPad 3 Front Glass/Digitizer Touch Panel Full Assembly / All-New / Fix Kit / Black
  • iPad 3 Front Glass/Digitizer Touch Panel Full Assembly / All-New / Fix Kit / White
  • iPad 3 Front Glass/Digitizer Touch Panel Full Assembly / New / Part Only / Black
  • iPad 3 Front Glass/Digitizer Touch Panel Full Assembly / New / Part Only / Black
  • iPad 3 Front Glass/Digitizer Touch Panel Full Assembly / New / Part Only / White
  • iPad 3 Front Glass/Digitizer Touch Panel Full Assembly / New / Part Only / White
  • 360°
360
iPad 3 Front Glass/Digitizer Touch Panel Full Assembly

This product cannot be shipped to Mexico.

Este producto no puede enviarse a México.

$39.99

$39.99

Nous vous enverrons un message lorsque le produit sera à nouveau disponible.

Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

Détails du produit

Description

Description

Replace a scratched or cracked front glass digitizer panel assembly. This part is compatible with a 3rd generation iPad. This assembly includes the glass touch panel, blank home button, camera bezel, and adhesive already installed, saving time and increasing the quality of your screen repair.

La pièce de rechange inclut

La pièce de rechange inclut

Contenu du kit

Contenu du kit

  • Front Glass/Digitizer Touch Panel Full Assembly
  • Display Bezel
  • iOpener Toolkit

This Fix Kit includes iFixit’s iOpener, a tablet opening tool designed to apply heat directly and evenly to case components joined with adhesive. Once the adhesive is softened with heat applied by the iOpener, the adhesive can be sliced using the many tools included in the iOpener kit. This toolkit is designed specifically for the iPad, but works with all tablets, smartphones, or other electronics needing heat application in the disassembly process. The iOpener is heated in the microwave and is reusable.

iOpener Toolkit includes:

Vidéo d'installation

Compatibilité

iPad 3 4G
16 GB LTE/CDMA
16 GB LTE/GSM
32 GB LTE/CDMA
32 GB LTE/GSM
64 GB LTE/CDMA
64 GB LTE/GSM
iPad 3 Wi-Fi
16 GB
32 GB
64 GB

Histoires de réparations

Shenshen Han's Story Photo #1296996
Shenshen Han's Story Photo #1296995

Mon problème

The screen/glass was shattered

Ma solution

Remove adhesive is the most difficult part

Mon conseil

be patient and you have to clean the LCD afterwards anyway so don't be afraid of touching it when removing the font panel/glass

Mon problème

I was repairing an iPad for a friend as a Christmas gift - free labor. They'd already purchased the part, and I didn't notice (unfortunately) that the frame was more bent than I'd realized, so when I placed the repair part, it cracked. I should have done a thorough visual inspection.

Ma solution

I ordered a seco . . .

Mon problème

Broken Screen

Ma solution

Went good except right at the end. I have one corner where the adhesive doesn't appear to be working as the corner keeps popping up.

Any advice?

Mon conseil

Take your time!

Mon problème

a friend's boy had cracked screen - helping a friend

Ma solution

most difficult part was the cracked glass did not come off in one piece. tape helped to keep small pieces from flying - i recommend safety glasses - the heating pad was ok

Mon conseil

the heating pad was a challenge - i resorted to hair dryer because of the cha . . .

Mon problème

Shattered screen

Ma solution

Getting the broken glass off took about an hour. Very tedious. After that it was as simple as can be. Had to reopen to remove some dust I missed but went great.

Mon conseil

Broken glass is super irritating to remove. Be careful and patient.

Mon problème

The screen was completely cracked.

Ma solution

The repair went pretty well. 30 min to open the screen and 20 to completely replace it. It was a smooth process!

Mon conseil

Putting tape on the display is a must, but sometimes the screen breaks even with the tape, so be careful.

Mon problème

Had a cracked screen

Ma solution

Installed well but the digitizer has some dead areas

Mon conseil

Use a small heat gun

Mon problème

Cracked screen.

Ma solution

The repair went great.

Mon conseil

Don't cheap out with digitizers....this was my 4th screen purchased in 3 weeks. The others I didn't even bother trying to put in as they were very low quality.

Mon problème

Bad battery, broken screen

Ma solution

Everything worked out great only problem I pad was the screen was cracked in several places, When trying to remove it it continued to crumble. Covered the screen with clear packing tape and slowly removed the screen piece by piece took my time and it worked out great. thank . . .

Mon problème

Cracked iPad 3 screen.

Ma solution

This is my second go around with an iPad 3 repair. My 5- and 3-year-olds are the culprits and we don't always have it in a case. Even when its in the case, it gets dropped on the floor several times.

The big thing with the iFIXIT replacement screens and Apple's original . . .

Voir plus