iPad mini 1/2 Front Glass/Digitizer Touch Panel Full Assembly

  • iPad mini 1/2 Front Glass/Digitizer Touch Panel Full Assembly / Fix Kit / Black / With Adhesive
  • iPad mini 1/2 Front Glass/Digitizer Touch Panel Full Assembly / Fix Kit / White / With Adhesive
  • iPad mini 1/2 Front Glass/Digitizer Touch Panel Full Assembly / New / Part Only / Black / With Adhesive
  • iPad mini 1/2 Front Glass/Digitizer Touch Panel Full Assembly / New / Part Only / Black / With Adhesive
  • iPad mini 1/2 Front Glass/Digitizer Touch Panel Full Assembly / New / Part Only / White / With Adhesive
  • iPad mini 1/2 Front Glass/Digitizer Touch Panel Full Assembly / New / Part Only / White / With Adhesive
  • 360°
360
iPad mini 1/2 Front Glass/Digitizer Touch Panel Full Assembly

This product cannot be shipped to Mexico.

Este producto no puede enviarse a México.

$54.99

$54.99

Nous vous enverrons un message lorsque le produit sera à nouveau disponible.

Répandez la magie de Noël
Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
Répandez la magie de Noël
Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12

Détails du produit

Description

Description

Replace a scratched or cracked Front Glass/Digitizer Touch Panel Full Assembly. This part is compatible with an iPad mini 1 and iPad mini 2 and includes the small parts and adhesive pre-installed in the assembly, saving time and increasing the quality of your screen repair.

La pièce de rechange inclut

La pièce de rechange inclut

  • iPad adhesive
  • Blank home button
  • Digitizer cable

Contenu du kit

Contenu du kit

  • Front Glass/Digitizer Touch Panel Full Assembly compatible with Pad mini 1/2
  • iOpener Toolkit

This Fix Kit includes iFixit’s iOpener, a tablet opening tool designed to apply heat directly and evenly to case components joined with adhesive. Once the adhesive is softened with heat applied by the iOpener, the adhesive can be sliced using the many tools included in the iOpener kit. This toolkit is designed specifically for the iPad, but works with all tablets, smartphones, or other electronics needing heat application in the disassembly process. The iOpener is heated in the microwave and is reusable.

iOpener Toolkit includes:

Remarque

The smart cover magnets will need to be transferred to the new front panel.

Compatibilité

iPad Mini 2 LTE
128 GB
16 GB
32 GB
64 GB
iPad Mini 2 Wi-Fi
128 GB
16 GB
32 GB
64 GB
iPad Mini CDMA
16 GB
32 GB
64 GB
iPad Mini GSM
16 GB
32 GB
64 GB
iPad Mini Wi-Fi
16 GB
32 GB
64 GB

Voir 2 appareils supplémentaires

Histoires de réparations

Ken Bauer's Story Photo #1357187

Mon problème

The screen somehow cracked, starting about 1/2" from lower right corner. Small fragments in lower corner with large cracks extending to the left and up.

Ma solution

Overall the repair followed the guide pretty well. The iOpener worked very well. The first time I microwaved it it didn't get too hot; I waited the . . .

Diego Rojas's Story Photo #1537849

Mon problème

Front glass was shattered, got a replacement part and tools from iFixit.

Ma solution

Removing the old glass was difficult because it was all shattered. I figure there is no easy way around this. Had some issues removing some of the tape holding the LCD panel and cracked it (see picture). I know this was my fault . . .

Mon problème

I replaced the battery, the logic board the audio connector and the hold switch in my iPod because the battery in mine would only last for 3 hours and I needed it to last for at least 12 hours because I work extremely long shifts where I'm playing music constantly.

Ma solution

Not so swimmingly, it's a very easy . . .

Mon problème

Needed new battery

Ma solution

The repair went well.

Mon conseil

The iPhone screen is not easy to get off - just go slow. Be ready for keeping track of extremely small screws.

Mon problème

My iPad mini’s front display was cracked.

Ma solution

This is undoubtedly a difficult repair to complete. The stress of trying to remove the LCD without damaging it was, for me, the hardest part. Opening the case with the ifixit iopener and a hairdryer wasn’t as difficult as I was expecting but was by no mea . . .

Mon problème

The previous touchscreen had come loose and the ribbon cable severed. This time I properly cleaned the sticky gum to allow the new adheasive to stick properly..

Ma solution

Great. Keep it clean

Mon conseil

Keep it clean

Mon problème

It’s my uncles iPad mini and it had a crack in it for years.

Ma solution

It was very difficult getting that slightly shattered glass off. While I was removing it I shattered it even more but still wasn’t a problem cause I was replacing it. When it came down to the LCD I was to scared that I was doing to brak . . .

Mon problème

Tired, old battery.

Ma solution

Took iPhone and new $32.89 (with shipping) IFIXIT battery to TechBar at noon today. Easy parking at front door in South Miami; Jamal took phone and battery and estimated 15 minutes to replace. I retreated to nearby French restaurant, Pastis, while the repair underway and ordere . . .

Mon problème

Granddaughter dropped it and cracked the screen

Ma solution

The repair went fairly smooth . Difficult getting the cracked glass off . Your instructions only show removing an intact glass . So a cracked glass can get messy and time consuming , but doable with patience .

Mon conseil

If glue gets on LCD , I found that it is eas . . .

Mon problème

The Glass display was shattered

Ma solution

This was my 3rd iPad Mini glass replacement, but it took a lot of time because of how shattered the screen was

Mon conseil

Take your time, don't rush. If you can, try to pull off the glass in one big sheet

Voir plus