iPhone 4 (CDMA/Verizon) Power and Sensor Cable

  • iPhone 4 (CDMA/Verizon) Power and Sensor Cable
  • 360°
360
iPhone 4 (CDMA/Verizon) Power and Sensor Cable

19,99 $US

19,99 $US

Nous vous enverrons un message lorsque le produit sera à nouveau disponible.

Détails du produit

Description

Description

Replace the power and sensor cable in a CDMA model iPhone 4 and fix and unresponsive power button.

La pièce de rechange inclut

La pièce de rechange inclut

  • Proximity Sensor
  • Ambient Light Sensor
  • Internal Power Button Switch.

Compatibilité

Compatibilité

  • iPhone 4 CDMA

Spécifications

Spécifications

Part #:
821-1280-A, 821-1373-A

Compatibilité

iPhone 4 CDMA
16 GB
32 GB
8 GB

Histoires de réparations

Avatar de l'utilisateur
Julie's Story Photo #405929
Julie's Story Photo #405930
Julie's Story Photo #405931

Mon problème

The screen on an iPhone 4 was smashed. Wanting to upgrade to an iPhone 6 and be able to trade-in old iPhone for the most cash back.

Ma solution

After a number of stops and starts in the process, I was able to successfully take the phone completely apart and put it back together. The hardest part for me was all o . . .

Avatar de l'utilisateur

Mon problème

Power switch stop working. Felt no spring/tactical feel to switch.

Ma solution

Went ok. Few differences from a 4s. IFIXIT instruction are very useful. I did find that the iPhone4 instructions were less detailed than the 4s. When lose parts would come into play the 4s instructions would call them out. This was . . .

Avatar de l'utilisateur

Mon problème

After about 4 years of owning an iPhone 4, the battery finally started to degrade to the point it would get a couple hours of use before shutting down. Mind you, I treated the device very carefully, never overcharging the battery overnight or other rookie moves that can kill it faster. So it had a g . . .

Avatar de l'utilisateur

Mon problème

Power Button unresponsive. Used "accessibility" settings to turn off iPhone. Plugged into charger to turn on. A pain in the you know what.

Ma solution

The power button was fine. Per ifixit, I went directly to replacing the iPhone 4 Power and Sensor Cable. Viola!

Mon conseil

(1). Tape the screws down on sheet of paper and l . . .

Avatar de l'utilisateur

Mon problème

Power switch on sister's iPhone 4 quit working a long time ago. Didn't depress or click at all. Battery would wear down quickly waiting for the screen to time out and go to sleep, and things would sometimes bog down without the ability to reboot the phone.

Ma solution

Repair worked like a charm. Took longer than . . .

Avatar de l'utilisateur

Mon problème

the button was very hard to turn on. Had to hold down the button very firmly.

Ma solution

not well

Mon conseil

Yes. I was very please with the engagement of advice from Ifixit and online help. But, unfortunately has not resolved the issue at this point.

Avatar de l'utilisateur

Mon problème

The button was no longer "clicky" hence my ordering this kit.

Ma solution

Overall, the guide was pretty straightforward, but getting the earpiece speaker to stay in place and the logic board to seat properly in the case during reassembly were the two most time-consuming steps.

It was quite the feeling of reli . . .

Avatar de l'utilisateur

Mon problème

When I was replace the screen , I feel like I must need to repair power and sensor and cellular antenna

Ma solution

It went well I watch the helpful ifix it.com video

Mon conseil

Good luck and watch video is help ! Remember every iphone carries has some thing different.

Avatar de l'utilisateur

Mon problème

Home and power button failure

Ma solution

If you take your time and have proper tools, everything will go fine. This was mostly simple for me as I have a background in repairing electronic devices.

Mon conseil

Use proper tools

Have lots of lighting

Work on a hard, stable surface

Be gentle. The parts are small and delica . . .

Avatar de l'utilisateur

Mon problème

Both my daughter and I had iPhones with batteries that would not last the day. 30% by 2:00pm. Six screws in less than 10 minutes and I had both batteries replaced.

Ma solution

Great. Easy to complete.

Mon conseil

Use a dishcloth as your work surface. It will help you keep from loosing those tiny screws if you drop one.

Voir plus