iPod Classic 160 GB Case Components
Replacement parts for your iPod Classic 160 GB model to fix your broken iPod!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Choisissez votre modèle de iPod Classic 160 GB :
Pièces compatibles avec iPod Classic 160 GB :
iPod Classic Metal Framework
Replace the frame and rubber bumpers that hold the logic board and screen in place.
iPod Classic Thin Rear Panel
Replace a broken or damaged rear panel for the Thin iPod Classic with this part. This product does not include headphone jack or hold switch.
iPod Classic LCD Metal Backplate
Metal plate securing the LCD
iPod Classic Thick Rear Panel
Shiny rear half of iPod / thick version
Infos sur l'appareil
The "thick" version of 160 GB iPod Classic is the original larger-capacity Classic. Apple has since simplified the Classic line to offer only the "thin" version. In September 2009, a new thin 160 GB was introduced. If you are unsure which version you have (as some parts are not interchangeable between models), perform the following steps:
1) Locate the serial etched on the rear panel of the iPod
2) Go to Apple's Online Service Assistant and enter your serial number and country
3) Look at the text under the picture on the left. If it reads "iPod Classic," you have the thick version. If it reads "iPod Classic (Late 2009)," you have the thin version.
The iPod Classic is quite enigmatic to diagnose when problems occur. Use our iPod Classic troubleshooting guide to figure out what's wrong.
Select a category below or browse all compatible parts to find what you need to fix your iPod!