iPod Classic 160 GB Logic Boards
Replacement parts for your iPod Classic 160 GB model to fix your broken iPod!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Choisissez votre modèle de iPod Classic 160 GB :
Pièces compatibles avec iPod Classic 160 GB :
iPod Classic (80 GB and 160 GB Thick) Logic Board
Replace a logic board (motherboard) compatible with the 80 GB or Thick 160 GB iPod Classic. Fix processing issues like unexpected shutdowns, reboots or water damage.
iPod Classic (160 GB) Logic Board
Replace a logic board (motherboard) compatible with the late model thin 160 GB capacity iPod Classic. Fix processing issues like unexpected shutdowns, reboots or water da...
Infos sur l'appareil
The "thick" version of 160 GB iPod Classic is the original larger-capacity Classic. Apple has since simplified the Classic line to offer only the "thin" version. In September 2009, a new thin 160 GB was introduced. If you are unsure which version you have (as some parts are not interchangeable between models), perform the following steps:
1) Locate the serial etched on the rear panel of the iPod
2) Go to Apple's Online Service Assistant and enter your serial number and country
3) Look at the text under the picture on the left. If it reads "iPod Classic," you have the thick version. If it reads "iPod Classic (Late 2009)," you have the thin version.
The iPod Classic is quite enigmatic to diagnose when problems occur. Use our iPod Classic troubleshooting guide to figure out what's wrong.
Select a category below or browse all compatible parts to find what you need to fix your iPod!