Indice de 0
Control Swith & Speed control are only working intermittently
58 14 0058d3[1|display=list]
54 26 2800[1|display=list]
The Milwaukee Drill Driver 2760-20 is a tool the Milwaukee company produces. This version was released in 2017. This model is referred to as the M18 Fuel Surge 1/4" Hex Hydraulic Driver. In the description of this model, the official Milwaukee Tool website provides information on this version such as the tool functions 50 percent quieter, reduced shaking by 3X, and the driving rate has increased. This product comes with a belt clip and a bit holder.
Established in 1924, the Milwaukee Tool company has been generating tools for decades. The industry invented the M12 and M18 cordless products for newer tool models. The M12 and M18 models were manufactured for battery-powered tools only.
When researching Milwaukee's tool options, there are a few different types of Drill Drivers besides the 2760-20 version: M18 Fuel 1/4" Hex Impact Driver with ONE-KEY and M18 Fuel 1/4" Hex Impact Driver. These two versions are similar to the M18 Fuel Surge 1/4" Hex Hydraulic Driver, but the differences can be easy to find when observing the designs.
Milwaukee Tool: M18 Fuel Surge Hex Impact Driver
Milwaukee Tool: M18 Hex Impact Driver/ONE-KEY
Milwaukee Tool: M18 Hex Impact Driver
This specific Milwaukee Drill Driver model can be identified by the tool's black handle and the red top and bottom. On the sides of the top portion, the word "Milwaukee" is engraved into the device with a lightning symbol underneath the white font. Underneath the symbol is also the word "Fuel" in white lettering. A metal clip attached to the device is located at the base of the tool. At the bottom on the front of the tool are three different buttons labeled as 1,2,3. The numbers indicate four power modes with the device. Underneath the numbers is the word "REDLITHIUM" with the word red being colored in red and lithium colored in white. On the backside of the tool, the words "Fuel" and "Brushless" are engraved into the device. Underneath the Hex drive chuck is an included LED light.
Inside the tool are a brushless motor, battery packs, and intelligence. Also included in the Drill Driver 2760-20 model is a hydraulic powertrain. On the side of the top portion of the label, there is a model number located in the top, right-hand corner on the silver background. This tool does not come in any other colors besides red and black.
- Maximum torque: 450 lbs
- Power source: Cordless
- Motor type: POWERSTATE Brushless
- Length: 5 in
- Weight: 2.81 lbs
- Height: 7.67 in
- Width: 2.38 in
- Voltage: 18V
- Battery system: M18
- Chuck type: Hex Quick Change
- Chuck size: 1/4" Hex
- Drive control: 4-Mode
- Maximum RPM: 3,000
- RPM range: 0 - 3,000
Functional Description (Manual)
- 1/4" Hex drive chuck
- Control switch
- Speed control
- Belt clip
- Auxiliary bit holder
Milwaukee Tool Official Website
Milwaukee Drill Driver 2760-20 Manual