Introduction

This guide will show you how to replace the hard drive for the ASUS X552LAV-BBI5N08 laptop.

Pièces

Aucune pièce nécessaire.

Battery is not showed in pictures.
  • Battery is not showed in pictures.

  • Flip the laptop face down.

Ajouter un commentaire

Slide the right button to the left. Hold the left button to the right. While you hold the left button in position, slide the battery out by pushing it away from you.
  • Slide the right button to the left.

  • Hold the left button to the right.

  • While you hold the left button in position, slide the battery out by pushing it away from you.

Ajouter un commentaire

Start by flipping the laptop face down.
  • Start by flipping the laptop face down.

  • Locate the bottom panel. It is at the opposite end of the battery.

  • Remove the two 12mm screws at the bottom panel with a Tri-wing Y1 screwdriver.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove bottom panel by lifting it up. Locate the hard drive. It is located in the bottom left corner.
  • Remove bottom panel by lifting it up.

  • Locate the hard drive.

  • It is located in the bottom left corner.

Ajouter un commentaire

Remove the four 5.5mm screws located on the hard drive case using a Tri-wing Y1 screwdriver. Slide the hard drive out to the left. Slide the hard drive out to the left.
  • Remove the four 5.5mm screws located on the hard drive case using a Tri-wing Y1 screwdriver.

  • Slide the hard drive out to the left.

Ajouter un commentaire

Lift the hard drive out. Once the hard drive is removed, place the hard drive at a different area.
  • Lift the hard drive out.

  • Once the hard drive is removed, place the hard drive at a different area.

Ajouter un commentaire

Place the hard drive on its side. Remove the four 5mm screws from the sides of the case by using a Tri-wing Y1 screwdriver. Lift the hard drive out of the case.
  • Place the hard drive on its side.

  • Remove the four 5mm screws from the sides of the case by using a Tri-wing Y1 screwdriver.

  • Lift the hard drive out of the case.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jason Vo

Membre depuis le 15/02/2018

857 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S17-G1, Boczar Spring 2018 Membre de l'équipe USF Tampa, Team S17-G1, Boczar Spring 2018

USFT-BOCZAR-S18S17G1

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 8

Total : 21