Pièces

Aucune pièce nécessaire.

Vidéo d'introduction

Grab a spudger and work your way around the outer edge of the screen Lean the screen all the way back to remove the plastic frame from the hinges at the bottom Lean the screen all the way back to remove the plastic frame from the hinges at the bottom
  • Grab a spudger and work your way around the outer edge of the screen

  • Lean the screen all the way back to remove the plastic frame from the hinges at the bottom

Ajouter un commentaire

Unscrew the 4 screws around the edge of the screen Lean the screen all the way forward on to the keyboard
  • Unscrew the 4 screws around the edge of the screen

  • Lean the screen all the way forward on to the keyboard

Ajouter un commentaire

Peal up the sticky tape next to the screen connector Pull the connector down carefully away from the screen and disconnect it
  • Peal up the sticky tape next to the screen connector

  • Pull the connector down carefully away from the screen and disconnect it

Ajouter un commentaire

connect the new screen and screw back in place Turn on the screen to test before putting the screen frame back on Tilt the screen all the way back and push the frame back on hinges 1st.
  • connect the new screen and screw back in place

  • Turn on the screen to test before putting the screen frame back on

  • Tilt the screen all the way back and push the frame back on hinges 1st.

  • Finally lean the laptop on its edge and clip the back on the hinges back in place.

Ajouter un commentaire

Ligne d'arrivée

Nick Myers

Membre depuis le 15/04/2018

293 Réputation

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 13