Introduction

Removing the keyboard may take a some effort and a little bit of patience, but you can do it!

Locate and remove the two 5.3 mm Phillips #1 screws holding the back panel in place.
  • Locate and remove the two 5.3 mm Phillips #1 screws holding the back panel in place.

Ajouter un commentaire

Use a spudger to pry the panel up from the laptop case and remove it. The laptop should now be open with the RAM and wifi chip now accessible.
  • Use a spudger to pry the panel up from the laptop case and remove it.

  • The laptop should now be open with the RAM and wifi chip now accessible.

Ajouter un commentaire

Locate the wifi chip.
  • Locate the wifi chip.

Ajouter un commentaire

Remove the 5 mm Phillips #1 screw holding the wifi chip in place. Carefully remove the wifi chip.
  • Remove the 5 mm Phillips #1 screw holding the wifi chip in place.

  • Carefully remove the wifi chip.

Ajouter un commentaire

Remove the 8, 9 mm Phillips #1 screws holding the panel in place.
  • Remove the 8, 9 mm Phillips #1 screws holding the panel in place.

Ajouter un commentaire

Flip the computer over, and with a spudger, remove the black panel directly below the keyboard. Remove the panel and flip it up onto the keyboard
  • Flip the computer over, and with a spudger, remove the black panel directly below the keyboard.

  • Remove the panel and flip it up onto the keyboard

Ajouter un commentaire

With the panel removed, locate the USB port ribbon cable connecting to the motherboard. Carefully disconnect the ribbon cable.
  • With the panel removed, locate the USB port ribbon cable connecting to the motherboard.

  • Carefully disconnect the ribbon cable.

Ajouter un commentaire

Unscrew the 5 mm Phillips #1 screw holding the USB ports in place.
  • Unscrew the 5 mm Phillips #1 screw holding the USB ports in place.

Ajouter un commentaire

The USB ports can now be removed from the laptop.
  • The USB ports can now be removed from the laptop.

Ajouter un commentaire

Flip the laptop and remove all 10 of the remaining 9mm screws from the back.
  • Flip the laptop and remove all 10 of the remaining 9mm screws from the back.

I had to remove 11 screws. The one underneath the battery.

sj.408.shane - Réponse

Use a spudger to gently lift the keyboard. Use a spudger to gently lift the keyboard.
  • Use a spudger to gently lift the keyboard.

The photos for Step 11 show the USB ports still in place. Why did you remove them in Step 9 if it wasn't necessary?

richmaru - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Alexander Lazar

Membre depuis le 22/04/2014

306 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 8-8, Regan Spring 2014 Membre de l'équipe Cal Poly, Team 8-8, Regan Spring 2014

CPSU-REGAN-S14S8G8

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 21

30 derniers jours : 93

Total : 4,602