Flipping your laptop over, the battery is located on the upper half of the laptop Use any screwdriver to shift the orange lever to the right
  • Flipping your laptop over, the battery is located on the upper half of the laptop

  • Use any screwdriver to shift the orange lever to the right

Ajouter un commentaire

While holding the lever to the right, use your nail or fingers to lift the battery up and out
  • While holding the lever to the right, use your nail or fingers to lift the battery up and out

Ajouter un commentaire

Use tweezers to remove the 2 small pieces of plastic at the bottom of the screen that are covering the screw heads. Use tweezers to remove the 2 small pieces of plastic at the bottom of the screen that are covering the screw heads.
  • Use tweezers to remove the 2 small pieces of plastic at the bottom of the screen that are covering the screw heads.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Use the small Phillips head screw driver to remove the 2 screws. Put both screws in a safe place.
  • Use the small Phillips head screw driver to remove the 2 screws. Put both screws in a safe place.

Ajouter un commentaire

Use the iFixit blue plastic pry-bar to carefully remove the front casing from the screen. Once the screen starts to pop off, use your fingers to gently pull the rest of it off. Use the iFixit blue plastic pry-bar to carefully remove the front casing from the screen. Once the screen starts to pop off, use your fingers to gently pull the rest of it off. Use the iFixit blue plastic pry-bar to carefully remove the front casing from the screen. Once the screen starts to pop off, use your fingers to gently pull the rest of it off.
  • Use the iFixit blue plastic pry-bar to carefully remove the front casing from the screen. Once the screen starts to pop off, use your fingers to gently pull the rest of it off.

Ajouter un commentaire

Remove the small silver screws from the 4 corners of the screen with the same screwdriver you have been using. Place them in a safe location. Remove the small silver screws from the 4 corners of the screen with the same screwdriver you have been using. Place them in a safe location. Remove the small silver screws from the 4 corners of the screen with the same screwdriver you have been using. Place them in a safe location.
  • Remove the small silver screws from the 4 corners of the screen with the same screwdriver you have been using. Place them in a safe location.

Ajouter un commentaire

After you remove the 4 screws the back of the screen will fall down. Carefully rest it on the table you are working on so you do not damage any connections.
  • After you remove the 4 screws the back of the screen will fall down. Carefully rest it on the table you are working on so you do not damage any connections.

Ajouter un commentaire

Remove the 3 screws highlighted in the picture from each side of the screen. Make sure you are holding onto the screen so it does not slam down when all the screws are removed. Remove the 3 screws highlighted in the picture from each side of the screen. Make sure you are holding onto the screen so it does not slam down when all the screws are removed.
  • Remove the 3 screws highlighted in the picture from each side of the screen. Make sure you are holding onto the screen so it does not slam down when all the screws are removed.

Ajouter un commentaire

Once the screen is carefully placed down, you will need to remove the last connection. Carefully pull the tape up and slide the connection out. The screen should now be completely detached. Once the screen is carefully placed down, you will need to remove the last connection. Carefully pull the tape up and slide the connection out. The screen should now be completely detached.
  • Once the screen is carefully placed down, you will need to remove the last connection. Carefully pull the tape up and slide the connection out. The screen should now be completely detached.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Christopher Wilson

Membre depuis le 19/03/2018

353 Réputation

2 tutoriels rédigés

Équipe

UMass Dartmouth, Team S4-G6, Covino Spring 2018 Membre de l'équipe UMass Dartmouth, Team S4-G6, Covino Spring 2018

UMASSD-COVINO-S18S4G6

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 14

Total : 25