Introduction

This guide will provide you with simple and clear steps on how to replace/remove the keyboard on your Acer Chromebook C720-2420.

Place your Chromebook upside down. Utilizing the precision magnetized Phillips #0 screwdriver, remove all thirteen 6.5 mm Phillips screws that secure the back cover.
  • Place your Chromebook upside down.

  • Utilizing the precision magnetized Phillips #0 screwdriver, remove all thirteen 6.5 mm Phillips screws that secure the back cover.

  • Before doing anything, make sure your Acer Chromebook is completely turned off.

Ajouter un commentaire

Use the plastic opening tool to carefully remove the bottom.
  • Use the plastic opening tool to carefully remove the bottom.

Ajouter un commentaire

Remove the two 3.6 mm Phillips screws holding the battery in place. Remove the two 3.6 mm Phillips screws holding the battery in place.
  • Remove the two 3.6 mm Phillips screws holding the battery in place.

Ajouter un commentaire

Disconnect the connector that attaches the battery to the Chromebook with a pair of pliers or tweezers. Alternatively, you could use your hands, as it may be difficult to unhook the connector.
  • Disconnect the connector that attaches the battery to the Chromebook with a pair of pliers or tweezers.

    • Alternatively, you could use your hands, as it may be difficult to unhook the connector.

Ajouter un commentaire

Remove the battery.
  • Remove the battery.

Ajouter un commentaire

Remove the six 4.7 mm Phillips screws that secure the fan. Remove the six 4.7 mm Phillips screws that secure the fan.
  • Remove the six 4.7 mm Phillips screws that secure the fan.

Ajouter un commentaire

Disconnect these cables from the motherboard using the tweezers. Alternatively, you may use your hands. Pull out the fan.
  • Disconnect these cables from the motherboard using the tweezers.

    • Alternatively, you may use your hands.

  • Pull out the fan.

Ajouter un commentaire

Remove the 3.6 mm  Phillips screw that secures the SSD in place. Remove the 3.6 mm  Phillips screw that secures the SSD in place.
  • Remove the 3.6 mm Phillips screw that secures the SSD in place.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Pull out the SSD. Pull out the SSD.
  • Pull out the SSD.

Ajouter un commentaire

Disconnect the speaker cable from the motherboard.
  • Disconnect the speaker cable from the motherboard.

Ajouter un commentaire

Disconnect the display cable from the motherboard.
  • Disconnect the display cable from the motherboard.

Ajouter un commentaire

Gently pull out the wire for the 2 PIC connectors.
  • Gently pull out the wire for the 2 PIC connectors.

Ajouter un commentaire

Remove the two 3.7 mm Phillips screws that hold the motherboard in place.
  • Remove the two 3.7 mm Phillips screws that hold the motherboard in place.

Ajouter un commentaire

Lift up the black tab on the ZIF connector to release the ribbon cable.
  • Lift up the black tab on the ZIF connector to release the ribbon cable.

  • Carefully remove the ribbon cable.

Ajouter un commentaire

Lift up the black tab on the ZIF connector to release the ribbon cable.
  • Lift up the black tab on the ZIF connector to release the ribbon cable.

  • Gently remove the ribbon cable

Ajouter un commentaire

Lift up the black tab on the ZIF connector to release the ribbon cable.
  • Lift up the black tab on the ZIF connector to release the ribbon cable.

  • Remove the ribbon cable.

Ajouter un commentaire

Lift up and remove the motherboard.
  • Lift up and remove the motherboard.

Ajouter un commentaire

Remove the speakers  located on both left and right bottom corners of the Chromebook with a plastic opening tool. Remove the speakers  located on both left and right bottom corners of the Chromebook with a plastic opening tool.
  • Remove the speakers located on both left and right bottom corners of the Chromebook with a plastic opening tool.

Ajouter un commentaire

Remove the two 3.6 mm  Phillips screws holding the USB and SD card port with a PH0 screwdriver. Lift out and remove the port.
  • Remove the two 3.6 mm Phillips screws holding the USB and SD card port with a PH0 screwdriver.

  • Lift out and remove the port.

Ajouter un commentaire

Remove the two 3.6 mm Phillips screws holding the LED sensors. Remove the LED Sensors. Remove the LED Sensors.
  • Remove the two 3.6 mm Phillips screws holding the LED sensors.

  • Remove the LED Sensors.

Ajouter un commentaire

Flip up the black tab on the ZIF connector to release the ribbon cable. Remove the ribbon cable.
  • Flip up the black tab on the ZIF connector to release the ribbon cable.

  • Remove the ribbon cable.

    • This ribbon is fragile, do not use excessive force.

Ajouter un commentaire

Leave only the single ribbon cable.
  • Leave only the single ribbon cable.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jessica Beckford

Membre depuis le 12/02/2018

494 Réputation

4 tutoriels rédigés

Équipe

USF Tampa, Team S15-G4, Boczar Spring 2018 Membre de l'équipe USF Tampa, Team S15-G4, Boczar Spring 2018

USFT-BOCZAR-S18S15G4

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 25

Total : 58