Introduction

This guide will walk you through replacing the trackpad of your device. It's a moderate process, and you'll need a Phillips #0 screwdriver to complete this guide.

Pièces

Aucune pièce nécessaire.

Use a Phillips head screw driver to remove the 13 screws in these locations. Use a Phillips head screw driver to remove the 13 screws in these locations.
  • Use a Phillips head screw driver to remove the 13 screws in these locations.

Ajouter un commentaire

Use a plastic spudger to pry up the bottom cover and remove it. Be sure to pry along other edges if necessary to avoid damaging the back cover. Be sure to pry along other edges if necessary to avoid damaging the back cover.
  • Use a plastic spudger to pry up the bottom cover and remove it.

  • Be sure to pry along other edges if necessary to avoid damaging the back cover.

Ajouter un commentaire

Unscrew the 2 battery screws. Make sure you keep these screws separate from the back cover screws; they are different! Make sure you keep these screws separate from the back cover screws; they are different!
  • Unscrew the 2 battery screws.

  • Make sure you keep these screws separate from the back cover screws; they are different!

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Use two fingers to unplug the battery-to-motherboard connection. Use two fingers to unplug the battery-to-motherboard connection.
  • Use two fingers to unplug the battery-to-motherboard connection.

Ajouter un commentaire

Take out battery by lifting it up in the manner pictured.
  • Take out battery by lifting it up in the manner pictured.

Ajouter un commentaire

Remove 9 trackpad screws. They will be of two different varieties. Make sure to keep these screw separate from those in the previous steps.
  • Remove 9 trackpad screws. They will be of two different varieties.

  • Make sure to keep these screw separate from those in the previous steps.

  • On the back of the trackpad, there is a plastic film that will cover some of the screws. Simply pull it back (do not pull if off) to remove the screws.

Ajouter un commentaire

Remove the trackpad ribbon cable. To do this, lift the small black component; it is hinged to the white component.
  • Remove the trackpad ribbon cable.

    • To do this, lift the small black component; it is hinged to the white component.

  • Then simply pull the ribbon cable out of the connector.

Ajouter un commentaire

Remove the small metal frame by simply lifting it out. Carefully peel up the tape holding the trackpad in place. Remove the trackpad from the computer frame.
  • Remove the small metal frame by simply lifting it out.

  • Carefully peel up the tape holding the trackpad in place.

  • Remove the trackpad from the computer frame.

  • Make sure to watch for any wires or other components and ensure that they are out of the way when removing the trackpad.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Richard Schmidt

Membre depuis le 19/03/2018

196 Réputation

2 tutoriels rédigés

Équipe

Baylor, Team S3-G1, Williams Spring 2018 Membre de l'équipe Baylor, Team S3-G1, Williams Spring 2018

BU-WILLIAMS-S18S3G1

4 membres

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 3

30 derniers jours : 15

Total : 32