Introduction

This guide will demonstrate how to partially take apart the Acer Chromebook C740-C4PE, in addition to removing the heatsink.

Pièces

Aucune pièce nécessaire.

Make sure the laptop is turned off and laid down on a flat surface. Unscrew the thirteen  10mm screws on the back of the device using a Phillips #0 screwdriver. Use the spudger or any other prying tool to pry the back plate off of the device.
  • Make sure the laptop is turned off and laid down on a flat surface.

  • Unscrew the thirteen 10mm screws on the back of the device using a Phillips #0 screwdriver.

  • Use the spudger or any other prying tool to pry the back plate off of the device.

    • Be sure not to pry too hard as it may result in snapping the back plate.

Ajouter un commentaire

Remove the four 5mm  screws on the heatsink using the Phillips #0 screwdriver. Remove the four 5mm  screws on the heatsink using the Phillips #0 screwdriver.
  • Remove the four 5mm screws on the heatsink using the Phillips #0 screwdriver.

Ajouter un commentaire

Loosen the two Phillips-head screws on the fan attached to the heatsink. Loosen the two Phillips-head screws on the fan attached to the heatsink.
  • Loosen the two Phillips-head screws on the fan attached to the heatsink.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Detach the two antennae cables from the  WiFi card by gently pulling on them.
  • Detach the two antennae cables from the WiFi card by gently pulling on them.

Ajouter un commentaire

Gently pull the fan cable out of the motherboard.
  • Gently pull the fan cable out of the motherboard.

    • Pulling too hard may break the wires or the connector itself.

Ajouter un commentaire

Remove the cable routed through the fan.
  • Remove the cable routed through the fan.

  • Do not completely remove the cables as they are attached to the motherboard. Once they are no longer routed in the fan, leave them as they are.

Ajouter un commentaire

Remove the heatsink from the motherboard.
  • Remove the heatsink from the motherboard.

  • Before changing the heatsink/fan, you must clean off the thermal paste from the CPU and apply new thermal paste.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Dylan Tocci

Membre depuis le 17/10/2017

231 Réputation

2 tutoriels rédigés

Équipe

UMass Dartmouth, Team S6-G4, Rockett Fall 2017 Membre de l'équipe UMass Dartmouth, Team S6-G4, Rockett Fall 2017

UMASSD-ROCKETT-F17S6G4

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 47