Introduction

The trigger is the starting mechanism to shoot the darts from your blaster. You must be careful not to harm other parts of the blaster while taking out the trigger.

Pièces

Aucune pièce nécessaire.

Using a screwdriver, remove the two 11.6 mm phillips 00 screws holding the grey slider together. Remove grey slider from the main body of the blaster. Remove grey slider from the main body of the blaster.
  • Using a screwdriver, remove the two 11.6 mm phillips 00 screws holding the grey slider together.

  • Remove grey slider from the main body of the blaster.

Ajouter un commentaire

Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together. Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together. Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together.
  • Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together.

Ajouter un commentaire

Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed. Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed. Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed.
  • Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed.

Ajouter un commentaire

Grab the orange trigger and without misplacing the other parts of the blaster, remove the trigger. Grab the orange trigger and without misplacing the other parts of the blaster, remove the trigger. Grab the orange trigger and without misplacing the other parts of the blaster, remove the trigger.
  • Grab the orange trigger and without misplacing the other parts of the blaster, remove the trigger.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Alfredo Antolinez

Membre depuis le 22/09/2014

301 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team 3-1, Brown Fall 2014 Membre de l'équipe USF Tampa, Team 3-1, Brown Fall 2014

USFT-BROWN-F14S3G1

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 134