Aller au contenu principal

Alienware M15x GPU Replacement

Ce dont vous avez besoin

  1. Alienware M15x GPU Replacement, GPU: étape 1, image 1 de 1
    • Turn the laptop over so that the bottom is facing upward.

  2. Alienware M15x GPU Replacement: étape 2, image 1 de 1
    • Release the battery latch and flip the battery out.

  3. Alienware M15x GPU Replacement: étape 3, image 1 de 2 Alienware M15x GPU Replacement: étape 3, image 2 de 2
    • Remove the two 4mm screws using a Phillips #1 screwdriver.

    • Remove the compartment door by sliding it away from the battery.

  4. Alienware M15x GPU Replacement: étape 4, image 1 de 1
    • Remove the four 4mm screws with the Phillips #1 screwdriver.

  5. Alienware M15x GPU Replacement: étape 5, image 1 de 1
    • Position the laptop vertically so that the hinge is facing up and the laptop is slightly open toward the ground

    • The laptop position should resemble an upside-down V shape.

    • Locate the panel and pry open using a plastic opening tool.

  6. Alienware M15x GPU Replacement: étape 6, image 1 de 3 Alienware M15x GPU Replacement: étape 6, image 2 de 3 Alienware M15x GPU Replacement: étape 6, image 3 de 3
    • Position the laptop normally, with the bottom on the ground and the screen flipped up towards you.

    • Lift the power button panel using the plastic opening tool.

    • Disconnect the ribbon cable by using tweezers to unclip the two small black clips. Remove power button panel.

  7. Alienware M15x GPU Replacement: étape 7, image 1 de 1
    • Remove the two 4mm screws with a Phillips #1 screwdriver.

  8. Alienware M15x GPU Replacement: étape 8, image 1 de 2 Alienware M15x GPU Replacement: étape 8, image 2 de 2
    • Use a Phillips #1 screwdriver to remove the 4mm screw from the exhaust port cover.

    • Remove the exhaust port cover entirely.

  9. Alienware M15x GPU Replacement: étape 9, image 1 de 3 Alienware M15x GPU Replacement: étape 9, image 2 de 3 Alienware M15x GPU Replacement: étape 9, image 3 de 3
    • Use a Phillips #0 screwdriver to remove the two 3mm screws holding the fan in place, then unclip the electrical connection using tweezers.

  10. Alienware M15x GPU Replacement: étape 10, image 1 de 1
    • Remove the heat sink by loosening the 4 screws with a Phillips #0 screwdriver.

  11. Alienware M15x GPU Replacement: étape 11, image 1 de 1
    • Use a Phillips #0 screwdriver to remove the two screws.

    • Remove the GPU from the laptop.

    • When replacing the GPU, it is important to reapply thermal paste in a small line along the length of the chip.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tomas Kronmark

Membre depuis le 01/22/18

193 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team S11-G3, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S11-G3, Banghart Winter 2018

CPSU-BANGHART-W18S11G3

5 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 6

30 derniers jours : 21

Total : 1,615