Introduction

This guide provides instructions on how to upgrade or replace the hard drive in an Alienware M15x.

Remove the battery by sliding the latch to the left and pulling the battery up. Remove the battery by sliding the latch to the left and pulling the battery up. Remove the battery by sliding the latch to the left and pulling the battery up.
  • Remove the battery by sliding the latch to the left and pulling the battery up.

Ajouter un commentaire

Remove the two 4-mm screws that hold the compartment door to the rest of the computer using a PH#0 screwdriver tip. Remove the two 4-mm screws that hold the compartment door to the rest of the computer using a PH#0 screwdriver tip.
  • Remove the two 4-mm screws that hold the compartment door to the rest of the computer using a PH#0 screwdriver tip.

Ajouter un commentaire

Slide the compartment door towards the front of the computer and lift. Slide the compartment door towards the front of the computer and lift. Slide the compartment door towards the front of the computer and lift.
  • Slide the compartment door towards the front of the computer and lift.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Use Phillips #1 screwdriver to loosen the four screws on the hard drive enclosure.
  • Use Phillips #1 screwdriver to loosen the four screws on the hard drive enclosure.

Ajouter un commentaire

Once the screws are loosened use the "PULL" tab to remove the current hard drive from the computer. Once the screws are loosened use the "PULL" tab to remove the current hard drive from the computer.
  • Once the screws are loosened use the "PULL" tab to remove the current hard drive from the computer.

Ajouter un commentaire

Remove the four small screws indicated to remove the casing to the hard drive. Remove the four small screws indicated to remove the casing to the hard drive.
  • Remove the four small screws indicated to remove the casing to the hard drive.

Ajouter un commentaire

Now take off the SATA converter and then connect it to the drive you would like to replace it with.
  • Now take off the SATA converter and then connect it to the drive you would like to replace it with.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

David Sann

Membre depuis le 22/01/2018

111 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team S11-G3, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S11-G3, Banghart Winter 2018

CPSU-BANGHART-W18S11G3

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 39