Introduction

Batteries fail from heat and if they reach their max charge cycles limit. This guide will show you how to replace it.

Pièces

Aucune pièce nécessaire.

Loosen the top left and top right 6.5mm PH1 screws that hold down the back cover.
  • Loosen the top left and top right 6.5mm PH1 screws that hold down the back cover.

  • The screws will not be able to be removed from the back cover. They can only be loosened or tightened.

Ajouter un commentaire

Slide back cover forward using your thumbs.
  • Slide back cover forward using your thumbs.

Ajouter un commentaire

Lift up the cover and set aside exposing the internals of the computer.
  • Lift up the cover and set aside exposing the internals of the computer.

Ajouter un commentaire

Make sure the laptop is turned off before starting.
  • Make sure the laptop is turned off before starting.

  • Using PH1 screwdriver loosen the two screws on the right of the battery.

  • The screws will not be able to be removed from the battery. They can only be loosened or tightened.

Ajouter un commentaire

Pull battery up using the tab provided. Pull battery up using the tab provided.
  • Pull battery up using the tab provided.

Ajouter un commentaire

Disconnect the clip connecting the battery to the computer.
  • Disconnect the clip connecting the battery to the computer.

  • Set battery aside.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andonaq Grozdani

Membre depuis le 01/03/2018

718 Réputation

5 tutoriels rédigés

Équipe

UMass Dartmouth, Team S2-G2, Simcock Spring 2018 Membre de l'équipe UMass Dartmouth, Team S2-G2, Simcock Spring 2018

UMASSD-SIMCOCK-S18S2G2

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 18

Total : 54