Introduction

This guide will show you how to replace the motherboard

Remove the plastic cover over the batteries on both sides of the device.
  • Remove the plastic cover over the batteries on both sides of the device.

Ajouter un commentaire

Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).
  • Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

Ajouter un commentaire

Using the Philips Screwdriver, remove the top 2 screws.
  • Using the Philips Screwdriver, remove the top 2 screws.

  • The screws are very small (2.5mm), put them somewhere you won't lose them.

Ajouter un commentaire

Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).
  • Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the face. Remove the face.
  • Remove the face.

Ajouter un commentaire

Remove four surrounding T5 screws as shown
  • Remove four surrounding T5 screws as shown

Ajouter un commentaire

Remove all four purple bumpers.  You may have to bend the metal surround out of the way.
  • Remove all four purple bumpers. You may have to bend the metal surround out of the way.

Ajouter un commentaire

Remove metal surround from the Jukebox. You may have to straighten out tabs that were bent during disassembly.
  • Remove metal surround from the Jukebox. You may have to straighten out tabs that were bent during disassembly.

Ajouter un commentaire

Desolder the motherboard from the frame at the eight locations shown. You may need to use a desoldering pump. Desolder the motherboard from the frame at the eight locations shown. You may need to use a desoldering pump.
  • Desolder the motherboard from the frame at the eight locations shown. You may need to use a desoldering pump.

Ajouter un commentaire

Desolder the remaining two points on the backside of the Jukebox. The Motherboard should now be free from the frame and ready for repair or replacement.
  • Desolder the remaining two points on the backside of the Jukebox.

  • The Motherboard should now be free from the frame and ready for repair or replacement.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Shaun Rifield

Membre depuis le 21/03/2018

121 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S2-G3, Freund Spring 2018 Membre de l'équipe IUPUI, Team S2-G3, Freund Spring 2018

IUPUI-FREUND-S18S2G3

3 membres

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 18