Introduction

The casing and structure of Beats by Dre Studio 2.0 over-ear headphones directly influence their sound quality. When the interior side panel is compromised, a proper seal (to one's ears) is not achievable, and ultimately sound quality is severely lessened. This guide will provide thorough instructions on how to replace the interior side paneling and restore optimal sound quality.

Use metal spudger to pry away ear cushion.
  • Use metal spudger to pry away ear cushion.

Ajouter un commentaire

Remove ear cushion from headphones (attached by adhesive).
  • Remove ear cushion from headphones (attached by adhesive).

Ajouter un commentaire

Remove two screws from the metal hinge using a Phillips head screwdriver to allow more motion from the speaker housing and more accessibility.
  • Remove two screws from the metal hinge using a Phillips head screwdriver to allow more motion from the speaker housing and more accessibility.

Ajouter un commentaire

Remove five screws using a Phillips head screwdriver from speaker housing.
  • Remove five screws using a Phillips head screwdriver from speaker housing.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Pull speaker away to access second secondary housing.
  • Pull speaker away to access second secondary housing.

  • Be careful not to stress wires and break solder points.

Ajouter un commentaire

Raise center cover. Remove screw from center of housing.
  • Raise center cover.

  • Remove screw from center of housing.

Ajouter un commentaire

Pull secondary housing away gently being careful not to damage the wires.
  • Pull secondary housing away gently being careful not to damage the wires.

Ajouter un commentaire

Remove four screws using a Phillips head screwdriver to remove the third housing.
  • Remove four screws using a Phillips head screwdriver to remove the third housing.

Ajouter un commentaire

Disconnect wires gently. Be gentle with the wires ensuring to pull them through with care to eliminate possible shortages. Be gentle with the wires ensuring to pull them through with care to eliminate possible shortages.
  • Disconnect wires gently.

  • Be gentle with the wires ensuring to pull them through with care to eliminate possible shortages.

Ajouter un commentaire

Pass wire through new housing and reconnect wires. Pass wire through new housing and reconnect wires. Pass wire through new housing and reconnect wires.
  • Pass wire through new housing and reconnect wires.

Ajouter un commentaire

Snap housing into place.
  • Snap housing into place.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Antares Cam

Membre depuis le 27/02/2018

193 Réputation

1 tutoriel rédigé

Équipe

colby and cameron Membre de l'équipe colby and cameron

Community

2 membres

1 tutoriel rédigé

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 9

30 derniers jours : 93

Total : 165