Introduction

This installation guide will help you separate the blades from the blender jar. Once separated, you can successfully install replacements blades or to check for any malfunctions with the blades.

Make sure the blender is turned off and unplugged from all power.
  • Make sure the blender is turned off and unplugged from all power.

  • Remove the glass jar from the base of the blender.

Ajouter un commentaire

Remove the top lid from the blender jar.
  • Remove the top lid from the blender jar.

Ajouter un commentaire

Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.
  • Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.

  • Take care not to cut yourself on the blades.

Ajouter un commentaire

Lift the rubber washer straight up to remove it from the blade assembly.
  • Lift the rubber washer straight up to remove it from the blade assembly.

  • Take care not to cut yourself on the blades.

Ajouter un commentaire

Lift the blades from the bottom cap.
  • Lift the blades from the bottom cap.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Andrew

Membre depuis le 04/10/2012

170 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 6-34, Regan Fall 2012 Membre de l'équipe Cal Poly, Team 6-34, Regan Fall 2012

CPSU-REGAN-F12S6G34

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 45

Total : 2,791