Introduction

The speaker and the LCD screen are one part in the BlackBerry 7280, and both must be replaced if one is faulty. This guide will demonstrate how to remove the screen and speaker after the outer cases are removed.

Pièces

Aucune pièce nécessaire.

With your thumb press down on the locking- button on the back of the BlackBerry 7280. Slide the battery cover off the device. Slide the battery cover off the device.
  • With your thumb press down on the locking- button on the back of the BlackBerry 7280.

  • Slide the battery cover off the device.

Ajouter un commentaire

Remove the lithium-ion battery from the back of the device using your index finger. Remove the lithium-ion battery from the back of the device using your index finger.
  • Remove the lithium-ion battery from the back of the device using your index finger.

Ajouter un commentaire

Hold the device with both hands. Lift the SIM card holder using your thumb and index finger. Remove the SIM card from the device.
  • Hold the device with both hands.

  • Lift the SIM card holder using your thumb and index finger.

  • Remove the SIM card from the device.

Ajouter un commentaire

Using a Torx T6 screwdriver, remove all six 1/8 inch screws (marked in red) from the back case. Set screws aside. The SIM card has been removed here to prevent damage to the card. This is recommended, but not not required.
  • Using a Torx T6 screwdriver, remove all six 1/8 inch screws (marked in red) from the back case. Set screws aside.

  • The SIM card has been removed here to prevent damage to the card. This is recommended, but not not required.

Ajouter un commentaire

Use the plastic opening tool to pry the back case away from the front case. Use the plastic opening tool to pry the back case away from the front case.
  • Use the plastic opening tool to pry the back case away from the front case.

Ajouter un commentaire

Using a Torx T6 screwdriver, remove the lone 1/8 inch screw that holds the upper metal bracket onto the larger metal bracket.  Set aside the screw and the bracket. Using a Torx T6 screwdriver, remove the lone 1/8 inch screw that holds the upper metal bracket onto the larger metal bracket.  Set aside the screw and the bracket.
  • Using a Torx T6 screwdriver, remove the lone 1/8 inch screw that holds the upper metal bracket onto the larger metal bracket. Set aside the screw and the bracket.

Ajouter un commentaire

Remove the front plastic case from the metal bracket. Remove the front plastic case from the metal bracket.
  • Remove the front plastic case from the metal bracket.

Ajouter un commentaire

Use the plastic opening tool to pry at the edge of the screen near the track-wheel. Use the plastic opening tool to pry at the edge of the screen near the track-wheel.
  • Use the plastic opening tool to pry at the edge of the screen near the track-wheel.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sarah Waddill

Membre depuis le 11/03/2013

10 Réputation

5 tutoriels rédigés

Équipe

Clemson, Team 12-2, Benson Spring 2013 Membre de l'équipe Clemson, Team 12-2, Benson Spring 2013

CLEM-BENSON-S13S12G2

4 membres

10 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 2

Total : 260