Press down on the battery release button and slide the back cover up with your thumb.
  • Press down on the battery release button and slide the back cover up with your thumb.

Ajouter un commentaire

Pry from the top of the battery to pull it out.
  • Pry from the top of the battery to pull it out.

Ajouter un commentaire

Slide the metal sim card cover to the unlock position.
  • Slide the metal sim card cover to the unlock position.

  • Remove the sim card.

  • The arrows on the sim card enclosure indicate the lock and unlock positions.

Ajouter un commentaire

Remove the two T5 Torx screws circled at the top of the phone.
  • Remove the two T5 Torx screws circled at the top of the phone.

  • The T5 Torx screws may be covered by a white sticker.

Ajouter un commentaire

Remove the red cover at the bottom of the phone.
  • Remove the red cover at the bottom of the phone.

  • You may have to work a spudger underneath to release the plastic clips.

Ajouter un commentaire

Be careful not to damage the front cover's plastic clips while trying to separate it from the phone. Use a spudger to pry the front cover away from the side panels. Work the spudger around the entire phone until the front cover is free.
  • Be careful not to damage the front cover's plastic clips while trying to separate it from the phone.

  • Use a spudger to pry the front cover away from the side panels.

  • Work the spudger around the entire phone until the front cover is free.

Ajouter un commentaire

Remove the keyboard.
  • Remove the keyboard.

Ajouter un commentaire

Remove the four T6 Torx screws located on the corners of the keyboard frame.
  • Remove the four T6 Torx screws located on the corners of the keyboard frame.

Ajouter un commentaire

Now remove the left and right side panels. Now remove the left and right side panels.
  • Now remove the left and right side panels.

Ajouter un commentaire

Remove the keyboard frame. Be sure to unhook the screen housing from the motherboard before continuing.  Refer to the square indicated in the second picture. Now remove the screen housing.
  • Remove the keyboard frame.

  • Be sure to unhook the screen housing from the motherboard before continuing. Refer to the square indicated in the second picture.

  • Now remove the screen housing.

Ajouter un commentaire

Unplug the ribbon cable from the board.
  • Unplug the ribbon cable from the board.

  • The ribbon cable is located at the top left of the phone above the screen.

Ajouter un commentaire

Insert tool between LCD screen and board.
  • Insert tool between LCD screen and board.

  • Pry LCD screen from board.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autre(s) ont terminé cette réparation.

Mandy Chan

Membre depuis le 20/01/2012

88 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 10-32, Amido Winter 2012 Membre de l'équipe Cal Poly, Team 10-32, Amido Winter 2012

CPSU-AMIDO-W12S10G32

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,607