Press down on the battery release button and slide the back cover up with your thumb.
  • Press down on the battery release button and slide the back cover up with your thumb.

Ajouter un commentaire

Pry from the top of the battery to pull it out.
  • Pry from the top of the battery to pull it out.

Ajouter un commentaire

Slide the metal sim card cover to the unlock position.
  • Slide the metal sim card cover to the unlock position.

  • Remove the sim card.

  • The arrows on the sim card enclosure indicate the lock and unlock positions.

Ajouter un commentaire

Remove the two T5 Torx screws circled at the top of the phone.
  • Remove the two T5 Torx screws circled at the top of the phone.

  • The T5 Torx screws may be covered by a white sticker.

Ajouter un commentaire

Remove the red cover at the bottom of the phone.
  • Remove the red cover at the bottom of the phone.

  • You may have to work a spudger underneath to release the plastic clips.

Ajouter un commentaire

Be careful not to damage the front cover's plastic clips while trying to separate it from the phone. Use a spudger to pry the front cover away from the side panels. Work the spudger around the entire phone until the front cover is free.
  • Be careful not to damage the front cover's plastic clips while trying to separate it from the phone.

  • Use a spudger to pry the front cover away from the side panels.

  • Work the spudger around the entire phone until the front cover is free.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sean Willis

Membre depuis le 26/01/2012

214 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 10-32, Amido Winter 2012 Membre de l'équipe Cal Poly, Team 10-32, Amido Winter 2012

CPSU-AMIDO-W12S10G32

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 882