Introduction

This guide is a single step that is a prerequisite for the screen and keyboard guides.

Pièces

Aucune pièce nécessaire.

With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.
  • With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.

Ajouter un commentaire

Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.
  • Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.

Ajouter un commentaire

Remove the battery by pushing against it from the right and then pulling towards you.
  • Remove the battery by pushing against it from the right and then pulling towards you.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the four screws indicated in the picture with a #T6 Torx Bit screwdriver and set them aside.
  • Remove the four screws indicated in the picture with a #T6 Torx Bit screwdriver and set them aside.

Ajouter un commentaire

Use a plastic opening tool or your fingernails to remove the plastic backing. Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated. Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated.
  • Use a plastic opening tool or your fingernails to remove the plastic backing.

  • Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated.

Ajouter un commentaire

Unscrew the four screws indicated in the picture with #T6 Torx Bit screwdriver.
  • Unscrew the four screws indicated in the picture with #T6 Torx Bit screwdriver.

  • Place the four screws released from the phone in a plastic bag.

Ajouter un commentaire

The black battery casing and logic board can now be separated for the following steps.
  • The black battery casing and logic board can now be separated for the following steps.

Ajouter un commentaire

The silver piece is not attached to the logic board in any way, and can be taken off by lifting it up with plastic opening tools.
  • The silver piece is not attached to the logic board in any way, and can be taken off by lifting it up with plastic opening tools.

  • Warning: Some of the phones have an adhesive between the silver part and the battery housing, so it could stick to the black piece you just removed.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

CeeJay

Membre depuis le 28/10/2009

19 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 9-17, Regan Fall 2009 Membre de l'équipe Cal Poly, Team 9-17, Regan Fall 2009

CPSU-REGAN-F09S9G17

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,226