Introduction

Follow this guide to install a SIM card in the Blackberry Pearl 8100.

Outils

Aucun outil requis.

Pièces

Aucune pièce nécessaire.

Before working on the phone, be sure that the phone is turned off. Begin by removing the back panel; this can be done by pressing the silver button on the backside of the Blackberry 8100, while simultaneously sliding the back panel off.
  • Before working on the phone, be sure that the phone is turned off.

  • Begin by removing the back panel; this can be done by pressing the silver button on the backside of the Blackberry 8100, while simultaneously sliding the back panel off.

Ajouter un commentaire

  • Remove the battery located directly below back panel.

Ajouter un commentaire

Slide the larger of the two metal casings upward (in the direction pointed to as “unlock”).
  • Slide the larger of the two metal casings upward (in the direction pointed to as “unlock”).

Ajouter un commentaire

Lift the metal casing.
  • Lift the metal casing.

Ajouter un commentaire

  • Insert an SD Card.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Robert Cronin

Membre depuis le 08/04/2010

520 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 34-57, Forte Spring 2010 Membre de l'équipe Cal Poly, Team 34-57, Forte Spring 2010

CPSU-FORTE-S10S34G57

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 9

Total : 8,533