Introduction

In this guide you'll be opening the back panel of your Blu Studio, this is the first step you'll take whenever you replace or add internal parts.

If you don't have any fingernails you may want to use the plastic prying tools.

Pièces

Aucune pièce nécessaire.

Begin by making sure your Blu Studio is turned off.
  • Begin by making sure your Blu Studio is turned off.

Ajouter un commentaire

To begin the removal of your back panel, first locate the lift tab on the bottom-right corner. To begin the removal of your back panel, first locate the lift tab on the bottom-right corner.
  • To begin the removal of your back panel, first locate the lift tab on the bottom-right corner.

Ajouter un commentaire

Next, gently slide your thumb (or plastic tool if you prefer) down the seem running the length of your Blu Studio until the rear panel is completely removed. Your rear panel should be placed nearby and in a safe location until you are finished with your task.
  • Next, gently slide your thumb (or plastic tool if you prefer) down the seem running the length of your Blu Studio until the rear panel is completely removed.

  • Your rear panel should be placed nearby and in a safe location until you are finished with your task.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autre(s) ont terminé cette réparation.

Erik reinbolt

Membre depuis le 23/09/2014

1 375 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team 9-1, Blackwell Fall 2014 Membre de l'équipe USF Tampa, Team 9-1, Blackwell Fall 2014

USFT-BLACKWELL-F14S9G1

3 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 12

Total : 1,920