Introduction

Use this guide to replace the top motherboard on your device.

Pièces

Aucune pièce nécessaire.

Flip speaker over so that the bottom is facing up. Using the blue spudger, lift the gray foam up and slowly peel it off with your hand.
  • Flip speaker over so that the bottom is facing up.

  • Using the blue spudger, lift the gray foam up and slowly peel it off with your hand.

Ajouter un commentaire

Using the screwdriver, unscrew three  screws. Detach the bottom cover from the rest of the speaker by pulling the two in opposite directions. Detach the bottom cover from the rest of the speaker by pulling the two in opposite directions.
  • Using the screwdriver, unscrew three screws.

  • Detach the bottom cover from the rest of the speaker by pulling the two in opposite directions.

Ajouter un commentaire

Remove the screw that is above the charging port. Remove the screw that is above the charging port.
  • Remove the screw that is above the charging port.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the two screws connecting the motherboard to the bottom cover of the speaker. Remove the bottom cover.
  • Remove the two screws connecting the motherboard to the bottom cover of the speaker.

  • Remove the bottom cover.

Ajouter un commentaire

Using your hands, grip and separate the soft plastic and the metal casing away from each other with some small force.
  • Using your hands, grip and separate the soft plastic and the metal casing away from each other with some small force.

Ajouter un commentaire

Remove the (4) four screws shown around the top of the inside.
  • Remove the (4) four screws shown around the top of the inside.

  • (2) two of the screws are shown here, the other side will look the same.

Ajouter un commentaire

Pry up and remove the soft plastic casing from the rest of the device. Pry up and remove the soft plastic casing from the rest of the device.
  • Pry up and remove the soft plastic casing from the rest of the device.

Ajouter un commentaire

Remove the 3 screws holding down the top circuit board. Remove the 3 screws holding down the top circuit board.
  • Remove the 3 screws holding down the top circuit board.

Ajouter un commentaire

Lift up and look on the underside of the circuit board.
  • Lift up and look on the underside of the circuit board.

  • Using the plastic opening tool, pry open the wide clamp keeping a ribbon to the top circuit board. The top circuit board can now freely be removed from the device.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Brian Butner

Membre depuis le 27/09/2017

410 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team S6-G2, Remmell Fall 2017 Membre de l'équipe USF Tampa, Team S6-G2, Remmell Fall 2017

USFT-REMMELL-F17S6G2

4 membres

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 15

7 derniers jours : 59

30 derniers jours : 353

Total : 1,837