Réparez vos affaires Communauté Boutique

Braven BRV-1M Outer Casing Replacement

Introduction

Having a damaged outer casing can allow foreign material to enter the speaker. By following this guide, one can learn how to remove and replace the outer case of the device.

Ce dont vous avez besoin

  1. Braven BRV-1M Outer Casing Replacement, Outer Casing: étape 1, image 1 de 1

    • To remove the outer casing, use a 3mm Hex bit to remove the 4 large 12mm Hex screws on both sides of the device.

    Traduire

  2. Braven BRV-1M Outer Casing Replacement: étape 2, image 1 de 1

    • Using the Metal Spudger, carefully pry each side of the rubber casing away from the device.

    • A little resistance should be felt, but not enough to bend the spudger.

    Traduire

  4. Braven BRV-1M Outer Casing Replacement: étape 3, image 1 de 1

    • To remove the inner plastic casing, use a Phillips #00 head bit to remove the 16 small 9mm screws surrounding the top side of the device.

    Traduire

  5. Braven BRV-1M Outer Casing Replacement: étape 4, image 1 de 1

    • Carefully lift away the housing and replace the broken casing/component. Replace using the new casing.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 1 autre contributeur

Erik Oliva

Membre depuis le 02/14/18

607 Réputation

6 tutoriels rédigés

Badges: 4

+ 1 badge de plus

Équipe

USF Tampa, Team S2-G1, Eyestone Spring 2018 Membre de l'équipe USF Tampa, Team S2-G1, Eyestone Spring 2018

USFT-EYESTONE-S18S2G1

4 membres

6 tutoriels rédigés

Un commentaire

Where can I buy parts for this speaker? My rear charging door has broken off disabling the ruggedness. Be easier to buy versus build new piece.

Michael Harruff - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 5

Total : 605