Introduction

Replacing the water valve should it fail to work.

Pièces

Aucune pièce nécessaire.

Remove the two 12mm black Phillips screws using a Phillips #0 screwdriver. Reminder for reassembly; This bottom piece is first to be screwed back on. Reminder for reassembly; This bottom piece is first to be screwed back on.
  • Remove the two 12mm black Phillips screws using a Phillips #0 screwdriver.

  • Reminder for reassembly; This bottom piece is first to be screwed back on.

Ajouter un commentaire

Remove the two 12mm Phillips screws using a Phillips #0 screwdriver.
  • Remove the two 12mm Phillips screws using a Phillips #0 screwdriver.

Ajouter un commentaire

Remove the grey plastic casing. Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver. Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver.
  • Remove the grey plastic casing.

  • Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver.

Ajouter un commentaire

Cut the band connecting the hose to the water valve.
  • Cut the band connecting the hose to the water valve.

  • Remove the water valve.

  • Reminder for reassembly; You will need a new band to tie the hose back to the water valve.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Antonio

Membre depuis le 26/09/2012

73 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 1-3, Propen Fall 2012 Membre de l'équipe Cal Poly, Team 1-3, Propen Fall 2012

CPSU-PROPEN-F12S1G3

4 membres

6 tutoriels rédigés

Where can I buy a new water valve assembly? Are they custom to the device or generally available ? Thanks!

Betsy Goodrich - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 36

Total : 4,128