Introduction

This guide will take you through the process of removing the motherboard of the device in order to get access to components located underneath.

Pièces

Aucune pièce nécessaire.

Remove three 8mm screws from the left side of the device. Remove four 8mm screws from the right side of the device. Remove four 8mm screws from the right side of the device.
  • Remove three 8mm screws from the left side of the device.

  • Remove four 8mm screws from the right side of the device.

Ajouter un commentaire

Apply pressure on the SD card to pop it out of the port. Remove the card by pulling it out. Remove the card by pulling it out.
  • Apply pressure on the SD card to pop it out of the port.

  • Remove the card by pulling it out.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Press down on the top cover of the device and slid it towards you until you see a slight gap created. Lift the top cover off. Lift the top cover off.
  • Press down on the top cover of the device and slid it towards you until you see a slight gap created.

  • Lift the top cover off.

Ajouter un commentaire

Slide the body case back away from the bottom. Pull up the body case to remove it from the bottom. Pull up the body case to remove it from the bottom.
  • Slide the body case back away from the bottom.

  • Pull up the body case to remove it from the bottom.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Zackery

Membre depuis le 15/02/2018

323 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team S17-G6, Boczar Spring 2018 Membre de l'équipe USF Tampa, Team S17-G6, Boczar Spring 2018

USFT-BOCZAR-S18S17G6

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 7

Total : 69