Open the back cover of the device by pressing on the indication arrow and pulling it open.
  • Open the back cover of the device by pressing on the indication arrow and pulling it open.

Ajouter un commentaire

Locate the yellow cutter blade unit as shown in the photo.
  • Locate the yellow cutter blade unit as shown in the photo.

Ajouter un commentaire

Using your thumb and forefinger, pull up, applying a small amount of pressure until the blade loosens and comes out. Be very careful when pulling out the cutter blade, it is very sharp. The Brother no. TL 5 Cutter Blade Unit is required for replacement.
  • Using your thumb and forefinger, pull up, applying a small amount of pressure until the blade loosens and comes out.

  • Be very careful when pulling out the cutter blade, it is very sharp.

  • The Brother no. TL 5 Cutter Blade Unit is required for replacement.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Haley Sweet

Membre depuis le 30/10/2014

425 Réputation

4 tutoriels rédigés

Équipe

Baylor, Team 4-4, Williams Fall 2014 Membre de l'équipe Baylor, Team 4-4, Williams Fall 2014

BU-WILLIAMS-F14S4G4

4 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 12

Total : 578