Check that the red RCA plug is connected to the red RCA jack labeled "R"              (this indicates the Right speaker).
  • Check that the red RCA plug is connected to the red RCA jack labeled "R" (this indicates the Right speaker).

  • Check that the white RCA plug is connected to the white RCA jack labeled "L" (this indicates the Left speaker).

  • To connect the ground clip, loosen the ground screw and insert the clip. Once clip is secure tighten the screw.

Ajouter un commentaire

Check the voltage selector switch to make sure its set to the proper voltage depending on your geographic location.
  • Check the voltage selector switch to make sure its set to the proper voltage depending on your geographic location.

  • Voltage selector should be set to 115 V/60 Hz in the U.S., or 230 V/50 Hz in other countries.

Ajouter un commentaire

Insert power cable into socket.
  • Insert power cable into socket.

Ajouter un commentaire

Ligne d'arrivée

Nikolai

Membre depuis le 12/10/2011

161 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 17-14, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 17-14, Regan Fall 2011

CPSU-REGAN-F11S17G14

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 3

30 derniers jours : 6

Total : 476