Introduction

Over time the tripod mount can become damaged and the tripod will no longer thread into the camera. This guide will explain how to replace the tripod mount.

Turn the camera so the bottom of the camera is facing up.
  • Turn the camera so the bottom of the camera is facing up.

  • Remove the two Phillips screws from the bottom cover using the Phillips #00 Screwdriver.

Ajouter un commentaire

Lift and remove the bottom cover from the camera.
  • Lift and remove the bottom cover from the camera.

Ajouter un commentaire

Remove the three screws securing  the tripod mount using the Phillips #00 Screwdriver.
  • Remove the three screws securing the tripod mount using the Phillips #00 Screwdriver.

Ajouter un commentaire

Lift and remove the tripod mount from the camera.
  • Lift and remove the tripod mount from the camera.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Ben Barber

Membre depuis le 04/10/2011

359 Réputation

2 tutoriels rédigés

Équipe

UW Stout, Team 5-1, Zhou Fall 2011 Membre de l'équipe UW Stout, Team 5-1, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G1

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 11

30 derniers jours : 38

Total : 4,333