Introduction

The Remote Control Socket is not difficult to access. However, it's connections are soldered, so it will be difficult to remove.

Pièces

Aucune pièce nécessaire.

Remove the two 4.8 mm black screws above the lens on the front of the camera.
  • Remove the two 4.8 mm black screws above the lens on the front of the camera.

Ajouter un commentaire

Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.
  • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

Ajouter un commentaire

Remove the 4.8 mm black screw on the left side of the camera.
  • Remove the 4.8 mm black screw on the left side of the camera.

Ajouter un commentaire

Remove the front panel by lifting it away from the camera's body.
  • Remove the front panel by lifting it away from the camera's body.

Ajouter un commentaire

Remove seven 4.25 mm black screws on the bottom panel.
  • Remove seven 4.25 mm black screws on the bottom panel.

Ajouter un commentaire

Remove the bottom panel.
  • Remove the bottom panel.

Ajouter un commentaire

Remove two 6.5 mm black screws from the panel.
  • Remove two 6.5 mm black screws from the panel.

Ajouter un commentaire

Remove the plastic remote control socket cap by pulling it straight out.
  • Remove the plastic remote control socket cap by pulling it straight out.

Ajouter un commentaire

Slide panel toward bottom of camera to remove. Slide panel toward bottom of camera to remove.
  • Slide panel toward bottom of camera to remove.

Ajouter un commentaire

Remove one 4.8 mm silver screw securing Remote Control Socket to camera.
  • Remove one 4.8 mm silver screw securing Remote Control Socket to camera.

Ajouter un commentaire

Remote Control Socket is now secured by 3 wires. Desolder connections to replace Remote Control Socket.
  • Remote Control Socket is now secured by 3 wires.

  • Desolder connections to replace Remote Control Socket.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Antonia

Membre depuis le 17/04/2011

109 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 8-8, Regan Spring 2011 Membre de l'équipe Cal Poly, Team 8-8, Regan Spring 2011

CPSU-REGAN-S11S8G8

5 membres

11 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 6

Total : 2,485