Introduction

This guide will take you through the steps required to change your screen and get a clear view of your picture.

Clean the broken or cracked screen as best as possible.
  • Clean the broken or cracked screen as best as possible.

  • Place the suction cup on the damaged screen.

Ajouter un commentaire

While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center. While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center.
  • While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center.

Ajouter un commentaire

Grab the handle of the suction cup and gently lift it up at an angle, as demonstrated in the picture. Remove the plastic screen from the camera. Release the broken screen by pulling down the lever of the suction cup.
  • Grab the handle of the suction cup and gently lift it up at an angle, as demonstrated in the picture.

  • Remove the plastic screen from the camera.

  • Release the broken screen by pulling down the lever of the suction cup.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Michael Peck

Membre depuis le 14/04/2014

134 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 3-41, Maness Spring 2014 Membre de l'équipe Cal Poly, Team 3-41, Maness Spring 2014

CPSU-MANESS-S14S3G41

4 membres

5 tutoriels rédigés

Be sure to measure the size of your screen before buying the suction cups. I got the heavy-duty ones and then found that they were too big for my Rebel T1i screen.

cmorris - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 8

30 derniers jours : 48

Total : 3,242