Introduction

If your LCD is cracked or not turning on replace it with this guide.

Using the plastic opening tool, pry off the top cover of the LCD assembly (within the red box in the first picture). Pry around the front and side edges for the easiest removal.
  • Using the plastic opening tool, pry off the top cover of the LCD assembly (within the red box in the first picture).

    • Pry around the front and side edges for the easiest removal.

Ajouter un commentaire

After removing the top cover of the LCD assembly, remove the LCD using the plastic opening tool.
  • After removing the top cover of the LCD assembly, remove the LCD using the plastic opening tool.

Ajouter un commentaire

Completely remove the LCD by disconnecting the ribbon cable from the LCD with a gentle pull.
  • Completely remove the LCD by disconnecting the ribbon cable from the LCD with a gentle pull.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Steven MacLean

Membre depuis le 14/01/2013

74 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 19-41, Regan Winter 2013 Membre de l'équipe Cal Poly, Team 19-41, Regan Winter 2013

CPSU-REGAN-W13S19G41

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 858