Aller au contenu principal

Canon PowerShot S50 Left Motherboard Replacement

Ce dont vous avez besoin

  1. Canon PowerShot S50 Left Motherboard Replacement, Battery: étape 1, image 1 de 2 Canon PowerShot S50 Left Motherboard Replacement, Battery: étape 1, image 2 de 2
    • Place camera LCD side up and press up on the battery door.

    • Let it swing open until you can see the battery inside.

  2. Canon PowerShot S50 Left Motherboard Replacement: étape 2, image 1 de 1
    • Press down on the orange plastic.

    • This will gently eject the battery from its compartment.

  3. Canon PowerShot S50 Left Motherboard Replacement: étape 3, image 1 de 2 Canon PowerShot S50 Left Motherboard Replacement: étape 3, image 2 de 2
    • Holding the edges, slide out the battery.

  4. Canon PowerShot S50 Left Motherboard Replacement, Front Panel/Battery Door: étape 4, image 1 de 1
    • Look at the camera from the side with the lanyard and 4 screws.

    • Remove the two 3.4 mm screws on the metallic colored part.

  5. Canon PowerShot S50 Left Motherboard Replacement: étape 5, image 1 de 1
    • Remove the 3mm screw on the top left.

    • NOTE: When reassembling, it is helpful to put the top screw back in before placing the front cover back on the camera.

    • Now remove the 5.3mm screw on the bottom.

  6. Canon PowerShot S50 Left Motherboard Replacement: étape 6, image 1 de 1
    • Place the camera LCD side down.

    • Remove the two 5.3mm screws by the battery door.

  7. Canon PowerShot S50 Left Motherboard Replacement: étape 7, image 1 de 1
    • Remove the four 3.4mm screws on the bottom of the camera around the tripod mount.

    • Make sure to keep these screws separate from the previous 5.3 mm screws.

  8. Canon PowerShot S50 Left Motherboard Replacement: étape 8, image 1 de 1
    • Stand the camera back up.

    • Remove the two 3.6mm screws on the side with the A/V Out port.

  9. Canon PowerShot S50 Left Motherboard Replacement: étape 9, image 1 de 1
    • Lift open the rubber flap covering the A/V Out port.

    • Remove the 3.4mm screw in the center.

    • During reassembly, put the A/V out rubber door on before replacing the front panel of the camera

  10. Canon PowerShot S50 Left Motherboard Replacement: étape 10, image 1 de 1
    • Use a spudger and gently open up the front panel of the camera.

    • A thin plastic ribbon will stay connected by a brown piece to front panel of the camera.

  11. Canon PowerShot S50 Left Motherboard Replacement: étape 11, image 1 de 1
    • There will be a brown plastic piece keeping the thin plastic ribbon in place.

    • Use the spudger to pull out the brown plastic piece attached to the orange plastic.

  12. Canon PowerShot S50 Left Motherboard Replacement: étape 12, image 1 de 1
    • Use a pair of tweezers and remove the metal piece inside the camera.

  13. Canon PowerShot S50 Left Motherboard Replacement: étape 13, image 1 de 1
    • Remove the battery door

    • NOTE: Putting this back on requires aligning the spring on the back of the door with the hole on the camera

  14. Canon PowerShot S50 Left Motherboard Replacement, Left Motherboard: étape 14, image 1 de 1
    • Disconnect the black and red cable on the left side of the lens.

  15. Canon PowerShot S50 Left Motherboard Replacement: étape 15, image 1 de 1
    • Disconnect the two orange ribbons on the front of the mother board.

  16. Canon PowerShot S50 Left Motherboard Replacement: étape 16, image 1 de 1
    • Pull off the orange ribbon on the upper left of the motherboard.

    • This will become available only after removing the ribbon on top.

    • Remove the other two orange ribbons on the middle of the left motherboard.

  17. Canon PowerShot S50 Left Motherboard Replacement: étape 17, image 1 de 1
    • Remove the 3.3mm screw halfway up the left side of the motherboard just to the left of the lens.

    • Go under the piece of plastic and remove the 2.6mm screw.

  18. Canon PowerShot S50 Left Motherboard Replacement: étape 18, image 1 de 2 Canon PowerShot S50 Left Motherboard Replacement: étape 18, image 2 de 2
    • Unplug the top part of the left motherboard.

    • Gently lift the left motherboard up to remove

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jacob

Membre depuis le 03/29/12

13 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 7-34, Maness Spring 2012 Membre de l'équipe Cal Poly, Team 7-34, Maness Spring 2012

CPSU-MANESS-S12S7G34

5 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 10

Total : 1,097