Introduction

Follow the step-by-step instructions to remove the outside case of your Canon PowerShot SD700

Pièces

Aucune pièce nécessaire.

Turn off camera by pressing power button above the LCD screen.
  • Turn off camera by pressing power button above the LCD screen.

  • Remove the battery and memory card.

Ajouter un commentaire

Remove the screws on the bottom of the camera using a 00 Philip's head screw driver
  • Remove the screws on the bottom of the camera using a 00 Philip's head screw driver

Ajouter un commentaire

Remove the screws on the right side of the camera.
  • Remove the screws on the right side of the camera.

Ajouter un commentaire

Remove the screws on the left of the camera underneath the "A/V out Digital" cover flap.
  • Remove the screws on the left of the camera underneath the "A/V out Digital" cover flap.

Ajouter un commentaire

Remove the screws on the bottom of the camera near the battery and the memory card slots.
  • Remove the screws on the bottom of the camera near the battery and the memory card slots.

  • This screw is longer than the rest of the screws.

Ajouter un commentaire

Remove the front back and side casings from the camera.
  • Remove the front back and side casings from the camera.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Emilio Rossi

Membre depuis le 07/04/2011

113 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 9-71, Walters Spring 2011 Membre de l'équipe Cal Poly, Team 9-71, Walters Spring 2011

CPSU-WALTERS-S11S9G71

4 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,319