Introduction

This guide is to help users replace the motherboard from the Compaq iPAQ Pocket PC 3830.

Pièces

Aucune pièce nécessaire.

Remove the four 0.8mm Phillips #00 screws from the back cover. Remove the four 0.8mm Phillips #00 screws from the back cover.
  • Remove the four 0.8mm Phillips #00 screws from the back cover.

Ajouter un commentaire

Remove the two screws on top of the motherboard and the two screws on bottom of motherboard
  • Remove the two screws on top of the motherboard and the two screws on bottom of motherboard

Ajouter un commentaire

Detach the wires from their combs on the motherboard. Detach the wires from their combs on the motherboard.
  • Detach the wires from their combs on the motherboard.

Ajouter un commentaire

Detach from comb that is located on motherboard.
  • Detach from comb that is located on motherboard.

Ajouter un commentaire

Remove the small piece from the motherboard. Remove the small piece from the motherboard.
  • Remove the small piece from the motherboard.

Ajouter un commentaire

Use tweezers to remove last piece from the comb on the motherboard.
  • Use tweezers to remove last piece from the comb on the motherboard.

Ajouter un commentaire

Remove the motherboard by simply lifting it.
  • Remove the motherboard by simply lifting it.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sedina Cavcic

Membre depuis le 05/09/2014

371 Réputation

3 tutoriels rédigés

Équipe

USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014 Membre de l'équipe USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014

USFSM-STEWART-F14S1G1

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 221